Cisco Profile Series Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cisco Profile Series. Cisco Profile Series 7 pages. Jbod on the 12g sas modular raid controller
Également pour Cisco Profile Series : Manuel de démarrage (41 pages), Manuel de l'utilisateur (44 pages), Manuel de démarrage (35 pages), Manuel de référence rapide (2 pages), Manuel d'installation (44 pages), Manuel de configuration (13 pages), Fiche d'installation (2 pages), Manuel d'installation (2 pages), Manuel de démarrage rapide (4 pages), Manuel de démarrage rapide (4 pages), Manuel d'installation (16 pages), Manuel de démarrage (32 pages), Manuel (16 pages), Manuel de démarrage (42 pages), Manuel de démarrage (46 pages)

Navigating the Menus

Use the remote control to operate your TANDBERG video system. A few basic

navigation principles are all you need to know to get started.



Press the home

key to show the Home menu.



The arrow keys in the centre of the upper part of the remote control are

used to navigate in the menus.



When the system shows the Home menu only (see below), pressing home

key again will hide the menu. To bring it back, press the home key again.



In an input field, pressing the C key will delete characters/numbers to the

left of the cursor position.

Press the home key to display the Home menu

The element

currently selected

is indicated by an

orange rectangle.

Use up and down

arrow keys to

navigate up and

down in a menu.

The little

triangle

indicates that a

submenu is

available.

Entry fields that expect a numeric entry will by default use the numbers from the

numeric pad. The default value for a field is shown on the right as either 123 for

a numeric field or abc for a text field. When entering values into a text field the

system works like the keypad on a mobile phone.

However, it is sometimes necessary to change between text and numbers, for

example when searching for a number in the phonebook or when entering a

dialling address of the form [email protected].

To change from text to

numeric values press the

corresponding softkey, as

displayed at the bottom of

the screen.

To enter a special character, press the

corresponding softkey and use the

arrows and tick button to select the

appropriate character.