Cisco Profile Series Manuel d'installation - Page 37

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco Profile Series. Cisco Profile Series 44 pages. Jbod on the 12g sas modular raid controller
Également pour Cisco Profile Series : Manuel de démarrage (41 pages), Manuel de l'utilisateur (44 pages), Manuel de l'utilisateur (7 pages), Manuel de démarrage (35 pages), Manuel de référence rapide (2 pages), Manuel de configuration (13 pages), Fiche d'installation (2 pages), Manuel d'installation (2 pages), Manuel de démarrage rapide (4 pages), Manuel de démarrage rapide (4 pages), Manuel d'installation (16 pages), Manuel de démarrage (32 pages), Manuel (16 pages), Manuel de démarrage (42 pages), Manuel de démarrage (46 pages)

Initial Configuration

This section provides instructions for initial configuration of the Cisco 800M Series ISRs. For the initial

configuration, we recommend using Cisco Configuration Professional Express. For instructions on how

to use Cisco Configuration Professional Express to configure the router, see

Professional Express User's

You may also initially configure your router by using the Cisco IOS command-line interface (CLI) or by

using the setup command facility. To create the initial configuration, the setup command facility prompts

you for basic information about your router and network.

This section contains the following topics:

•

To configure the initial router settings by using the Cisco IOS CLI, you must set up a console connection.

For instructions on how to set up a console connection, see the

Console Port" section on page

The setup command facility guides you through the configuration process by prompting you for the

specific information that is needed to configure your system. Use the setup command facility to

configure a hostname for the router, to set passwords, and to configure an interface for communication

with the management network.

To use the setup command facility, you must set up a console connection with the router and enter the

privileged EXEC mode.

Note

To configure the initial router settings by using the setup command facility, follow these steps:

Guide.

Cisco IOS CLI, page 4-1

Setup Command Facility, page 4-1

Verifying the Initial Configuration, page 4-4

For instructions on how to set up a console connection, see the

the Console Port" section on page

C H A P T E R

3-4.

Cisco 800M Series Integrated Services Router Hardware Installation Guide

Cisco Configuration

"Connecting a Terminal or PC to the

"Connecting a Terminal or PC to

4-1