Cisco Profile Series Manuel d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco Profile Series. Cisco Profile Series 16 pages. Jbod on the 12g sas modular raid controller
Également pour Cisco Profile Series : Manuel de démarrage (41 pages), Manuel de l'utilisateur (44 pages), Manuel de l'utilisateur (7 pages), Manuel de démarrage (35 pages), Manuel de référence rapide (2 pages), Manuel d'installation (44 pages), Manuel de configuration (13 pages), Fiche d'installation (2 pages), Manuel d'installation (2 pages), Manuel de démarrage rapide (4 pages), Manuel de démarrage rapide (4 pages), Manuel de démarrage (32 pages), Manuel (16 pages), Manuel de démarrage (42 pages), Manuel de démarrage (46 pages)

Figure 2-7

Mount the router into the rack using the screws provided in the rack.

Step 2

Installing the modules

You can choose either slot 0 or slot 1 for inserting modules.

Combination of modules supported by Cisco 800M Series ISR is as follows:

•

Two 3G modules are not supported at a time.

Note

Make sure that the router is powered off before inserting the modules.

Warning

To remove the blank module, use screw drivers to loosen the screws. The screws are designed in way

Step 1

that after it disengages, user can hold the screws and pull the blank cover out.

Step 2

Remove the blank covers for the slots where you want to insert the module as shown in

Cisco 800M Series Integrated Services Router Hardware Installation Guide

2-8

Attaching the Brackets (I/O side facing the user - Offset rack mount)

Offset rack mount

One 3G module and one serial port module.

Two serial port modules.

Chapter 2

Figure

2-8.