Cisco Quick Set C20 Manuel de démarrage - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco Quick Set C20. Cisco Quick Set C20 35 pages. Tc7.3, english, december 2015
Également pour Cisco Quick Set C20 : Manuel de démarrage (41 pages), Manuel de l'utilisateur (44 pages), Manuel de démarrage (42 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages), Manuel de l'utilisateur (25 pages), Manuel de dépannage (37 pages), Fiche d'installation (2 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages), Manuel de démarrage (32 pages), Manuel de l'utilisateur (48 pages), Manuel de démarrage (42 pages), Manuel de démarrage (46 pages)

Imprimer la page

Cisco TelePresence Systems

GettinG started Guide

Table of contents

Introduction

touch controller

Setting the system/codec password

You need a username and password to sign in to the web

and command line interfaces of your system.

The video conference system is delivered with a default

user account with username

admin

and no password set.

This user has full access rights to the system.

NOTE: We strongly recommend that you set a password for

the

admin

user to restrict access to system configuration.

Make sure to keep a copy of the password in a safe

You have to contact your Cisco representative if you have

forgotten the password.

The system/codec password cannot be set using the Touch

controller. This has to be done via the web interface.

1. Sign in to the web interface with your username and

current password.

If a password is not currently set, use a blank

password.

2. Go to the

Maintenance

tab and select

3. Enter the

Current

password, the

New

repeat the new password in the appropriate input fields.

The password format is a string with 0–64 characters.

4. Click

Change

password.

User interfaces

Setting the Administrator Settings menu

password

When starting up the system for the first time the

Administrator Settings menu password is not set.

NOTE: We strongly recommend that you define a password

to protect the Administrator Settings menu, since these

settings affect the behavior of the video conference system.

The Administrator Settings menu password cannot be set

using the Touch controller. This has to be done using the

place.

command line interface or the remote control and on‑

screen menu.

Using the command line interface:

1. Connect to the system through the network or the

serial data port, using a command line interface (SSH or

Telnet).

Current

2. Type the following command:

xCommand SystemUnit MenuPassword Set

Change

Password.

Password: <password>

The password format is a string with 0–255 characters.

password, and

Using the remote control and on‑screen menu:

1. Go to

Home > Settings > Administrator Settings > Set

password.

On the remote control, press the # key to toggle

between lower or upper case characters and numbers:

abc/ABC/123.

2. Enter the menu password. The password you enter is

hidden; each character is replaced with a star (*).

3. Select

Save

to save the changes, or

without saving.

4. Press

Home

Configuration

Appendices

Cancel

to leave

(

)

to exit.