Cisco Quick Set C20 Manuel de démarrage - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco Quick Set C20. Cisco Quick Set C20 42 pages. Tc7.3, english, december 2015
Également pour Cisco Quick Set C20 : Manuel de démarrage (41 pages), Manuel de l'utilisateur (44 pages), Manuel de démarrage (42 pages), Manuel de démarrage (35 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages), Manuel de l'utilisateur (25 pages), Manuel de dépannage (37 pages), Fiche d'installation (2 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages), Manuel de démarrage (32 pages), Manuel de l'utilisateur (48 pages), Manuel de démarrage (46 pages)

Imprimer la page

Cisco TelePresence Video Systems

Contents

Setting date, time and location

(when not set by a provisioning system)

You should check that the date and time settings are correct

when you set up your video conference system. the system

uses this information for example to time stamp messages

transmitted to gatekeepers and other network elements.

You can find the time in the top right corner of the touch

controller display.

Back to task overview

D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.

Introduction

User interfaces

1. tap

Settings > Date, Time &

2. tap

24h

3. tap dd.mm.yy,

Format

you prefer.

4. Select the

list of available zones by tapping the - or + signs.

5. Set

Date & Time Mode

to be regularly updated; otherwise, select Manual.

if you select Manual, enter the correct value for Hour, Minute,

Year, Month, and Day. tap the plus and minus signs to

increase or decrease a value.

if you select Auto, the NtP server address can be automati-

cally obtained from the network (set the

Auto) or you can enter the

(set

NTP Mode

6. tap

Save

saving.

7. tap

Exit

to return to the home menu.

Confirguration

Configuration

Location.

12h

to select the

Time Format

you prefer.

mm.dd.yy

yy.mm.dd

to select the

Time Zone

your system is in. Step through the

Auto

if you want time and date

NTP Mode

NTP Server

address yourself

to Manual).

to save the changes, or

Undo

to leave without

Appendices

Date

Getting Started Guide

Contacts