Cisco Quick Set C20 Manuel de démarrage - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco Quick Set C20. Cisco Quick Set C20 42 pages. Tc7.3, english, december 2015
Également pour Cisco Quick Set C20 : Manuel de démarrage (41 pages), Manuel de l'utilisateur (44 pages), Manuel de démarrage (42 pages), Manuel de démarrage (35 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages), Manuel de l'utilisateur (25 pages), Manuel de dépannage (37 pages), Fiche d'installation (2 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages), Manuel de démarrage (32 pages), Manuel de l'utilisateur (48 pages), Manuel de démarrage (46 pages)

Imprimer la page

Cisco TelePresence Video Systems

Contents

Configuration tasks

the initial configuration tasks are described on the following

pages. Click the

hyperlink for the method you

want to use to find the task description.

Getting started

You can see how to wake up the system and start using one

of the user interfaces here:

Touch controller

Remote control

and on screen menu

Web interface

D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.

Introduction

User interfaces

Click the

to this task overview.

Provisioning set-up

(when using a provisioning system)

Your system may be configured by an external provision-

ing system. this way a number of settings are provisioned

automatically, and you (most likely) do not have to set the iP,

H.323, SiP and time and date settings.

Choose one of the following methods to set-up the provi-

sioning parameters:

Touch controller

Remote control

and on screen menu

Web interface

Confirguration

Configuration

Back...

button in the task description to go back

Getting Started Guide

Appendices

Setting the IP parameters

(when not set by a provisioning system)

Your video conference system must be connected to an iP

network. Both iP version 4 (iPv4) and iP version 6 (iPv6) are

supported. in both cases, the iP parameters can be assigned

automatically by the network, or you can set everything manually.

Choose one of the following methods to set the iP parameters:

Touch controller

Remote control

and on screen menu

Web interface

Contacts