Cisco SX series Manuel de démarrage - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco SX series. Cisco SX series 34 pages. Telepresence video systems
Également pour Cisco SX series : Manuel de démarrage (33 pages), Manuel de démarrage (46 pages)

Imprimer la page

Cisco TelePresence Video Systems



Introduction

Provisioning set-up

(When using a provisioning system)

If in doubt for any of the parameters below, contact your provi-

sioning system provider.

See the administrator guide for your product, to find more

information about the individual provisioning settings.

Select provisioning infrastructure

1. Go to the

Setup

tab, and click Configuration.

2. Open the

Provisioning

settings from the left column.

3. Select a provisioning infrastructure from the

down list:

• TMS – Cisco TelePresence Management System (Not avail-

able for SX10)

• VCS – Cisco Video Communication Server

• CUCM – Cisco Unified Communications Manager

• Auto - The system starts provisioning by first trying VCS,

then TMS and finally CUCM.

• Edge - CUCM via Expressway

If you select Off, all configurations must be set manually.

If you are changing a value setting,

you have to always click

save

to confirm the change.

D15318.03 Video Systems Getting Started Guide CE8.2, JUNE 2016.

User interfaces

Web interface

Set the required provisioning parameters

Which parameters to set depend on which infrastructure was selected.

TMS

1. It may be required to authenticate the video system with

Cisco TMS. If so, enter

respective input fields.

2. Enter the IP address or DNS name of the Cisco TMS server

in the

Address

heading.*

Mode

drop

3. Enter the

sponding input field.

VCS

1. It may be required to authenticate the video system with

the Cisco VCS. If so, enter

respective input fields.

2. Enter the IP address or DNS name of the Cisco VCS in the

Address

3. Enter the SIP

ing input field.

Have a look at the

information about VCS provisioning.

Setup assistant

LoginName

and

Password

input field under the

ExternalManager

Path

to the provisioning service in the corre-

LoginName

and

Password

input field under the

ExternalManager

heading.*

Domain

for the Cisco VCS in the correspond-

Cisco VCS provisioning

appendix for more

Touch

Unified Communications Manager

Enter the IP address or DNS name of the CUCM provisioning

server in the

Address

input field under the

in the

heading.*

You can find more details about setting up CUCM provisioning

in the

Administering CE endpoints on CUCM

CUCM via Expressway**

Upon ordering the CUCM via Expressway service, you have

received a username, password, and domain name.

1. Enter the username in the

2. Enter the password in the

in the

3. Enter the domain name in the

ExternalManager

heading.

In some cases, you must manually enter the Expressway

address. Enter the address you have received upon ordering

in the

Address

input field under the

* The DHCP server can be set up to provide the External Manager address

automatically (Option 242 for TMS; Option 150 for UCM). Any input set up

here overrides the setting provided by DHCP.

**For CUCM via Expressway to show up as provisioning option for your

video system, you must have the encryption option key installed.

Getting Started Guide

Appendices

ExternalManager

guide.

LoginName

input field.

Password

input field.

Domain

input field under the

ExternalManager

heading.