Cisco SX80 Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco SX80. Cisco SX80 7 pages. With touchpad 10
Également pour Cisco SX80 : Manuel de référence rapide (2 pages), Manuel (45 pages), Manuel (45 pages), Manuel de l'utilisateur (19 pages), Manuel d'installation (24 pages), Manuel d'installation (2 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages), Manuel d'installation (7 pages), Manuel de référence (8 pages), Manuel de démarrage (46 pages)

Installation guide for Cisco TelePresence SX80

About cameras

The codec has three HDMI camera inputs, and can therefore support up to three cameras.

Cisco provides the following cameras:

You can use any combination of these cameras, as long as the maximum number of

cameras does not exceed three

See how to connect the cameras on the following pages.

For more details about the Cisco cameras, refer to camera guides that are available at

http://www.cisco.com/go/camera-docs

Note that Cisco TelePresence SpeakerTrack 60 is composed of two cameras.

Note that the camera surface is hot when the camera is in operation.

Cisco TelePresence SpeakerTrack 60

based on two Cisco TelePresence Precision 60

cameras and a microphone panel for

advanced speaker tracking.

Cisco TelePresence Precision 60

is a full HD

camera with 1080p60 resolution, 20x total

zoom, and wide angle view.

Cisco TelePresence PrecisionHD 1080p 4xS2

is a full HD camera with 1080p60 resolution

and 4x optical zoom.

Connect Cisco TelePresence SpeakerTrack 60

Power

(100-240 VAC, 50/60 Hz)

Always use the provided

power cable and adapter

(12 V

, minimum 6.5 A).

Power

adapter

Connect the two cameras in the

SpeakerTrack 60 assembly to the codec's

and 2

Also connect SpeakerTrack 60 to the

codec's 2

power.

Refer to the installation guide that

comes with SpeakerTrack 60 for further

information about camera assembly and

cabling.

camera inputs (HDMI).

or 3

Ethernet port, and to