Cisco TelePresence DX70 Mise en place - Page 2

Parcourez en ligne ou téléchargez le pdf Mise en place pour {nom_de_la_catégorie} Cisco TelePresence DX70. Cisco TelePresence DX70 2 pages. Nhs networked use
Également pour Cisco TelePresence DX70 : Manuel d'installation (6 pages), Manuel de l'utilisateur (48 pages), Manuel de référence rapide (2 pages), Manuel de l'utilisateur (48 pages), Manuel de l'utilisateur (33 pages), Manuel de l'utilisateur (40 pages), Manuel de l'utilisateur (14 pages), Manuel (43 pages), Installation pour l'utilisation en maison de retraite (3 pages)

Tap

the home button (a small house shaped icon at the bottom of the screen) and wait. Assuming

your system and the addresses entered are not caught by your firewall rules your system will

automatically register with our infrastructure and you will see a 6-digit number appear at the bottom

left hand side of your screen after a few minutes. During this process your device may restart and

you may be asked to enter an unlock PIN. Please used the one supplied in your email from

vc.support. Once you see your device with a 6-digit number please contact VC Support to be

assigned your full 9-digit number after which you will be able to make and receive calls to our other

systems.

Tap the dots

(and OK again if you're asked on the next screen)

then

tap Settings

(round orange icon).

Tap IPv4 configuration. Tick Use static IP

uses DHCP and NAT addressing). Enter your network details and

tap Save

On the left hand menu, still within Settings → Wireless &

Networks

tap More...

then

insert a tick for

use alternative TFP

asked about a Trust list and enter

1 and again for server 2.

(unless your board

TFTP server

settings.

server.

Tap Continue

10.247.96.242

for TFTP server

Tap

the

box

when