Cisco TelePresence MX700 Manuel d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco TelePresence MX700. Cisco TelePresence MX700 32 pages. Single camera on a free standing floor stand or a floor stand secured to the wall
Également pour Cisco TelePresence MX700 : Manuel d'installation (32 pages), Manuel de démarrage rapide (12 pages), Manuel d'installation (28 pages), Manuel d'installation (29 pages), Manuel de référence rapide (2 pages), Manuel (45 pages), Manuel (45 pages), Manuel d'installation (29 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages), Manuel de démarrage (46 pages)

Imprimer la page
Cisco TelePresence MX700 Manuel d'installation
Installation guide for Cisco TelePresence MX700 Single camera - Wall mount
7
Fasten clamps on monitors
A, D
While the monitors are still in the package,
mount the clamps on the rear side of both
monitors.
78-100254-03A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
1
Use the Allen key 2.5 mm
and loosen, but do not
remove, the premounted
screws.
3
Push the support bracket
tight against the back plate
of the monitor.
2
Slide the clamp in place on
the monitor and make sure
that all the small clamps are
properly fitted.
4
Tighten the screws and
check that the clamp is
properly fastened.
Page 11