Cisco TelePresence MX700 Manuel d'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco TelePresence MX700. Cisco TelePresence MX700 32 pages. Single camera on a free standing floor stand or a floor stand secured to the wall
Également pour Cisco TelePresence MX700 : Manuel d'installation (32 pages), Manuel de démarrage rapide (12 pages), Manuel d'installation (28 pages), Manuel d'installation (29 pages), Manuel de référence rapide (2 pages), Manuel (45 pages), Manuel (45 pages), Manuel d'installation (29 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages), Manuel de démarrage (46 pages)

Imprimer la page
Cisco TelePresence MX700 Manuel d'installation
Installation guide for Cisco TelePresence MX700 Single camera - Wall mount
10
Fasten left monitor and connect power cable
4 ×
M6x35, countersunk
2 ×
M6x90, countersunk
2 ×
M6x100, pan
2 ×
Bracket
78-100254-03A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
Enter the following screws:
1
•
Four M6x35 screws, from front.
•
Two M6x90 screws, from underneath.
•
Two M6x100 screws and their brackets, from
underneath.
Then, tighten all screws.
Connect power cable
2
A power cable is strapped at the rear of the
monitor. Connect it to the close-by socket.
Let the other end hang freely. It will be
connected to the right monitor in step 12.
Rear view
Left side of the
monitor, viewed
from underneath
Right side of the
monitor, viewed
from underneath
Page 14