Cisco TelePresence Video Systems
Contents
Provisioning set-up
(When using a provisioning system)
If in doubt for any of the parameters below, contact your provi-
sioning system provider.
See the administrator guide for your product, to find more
information about the provisioning settings.
Select provisioning infrastructure
1. Go to the
Configuration
tab, and click
2. Open the
Provisioning
settings from the left column.
3. Select a provisioning infrastructure from the
down list:
• TMS – Cisco TelePresence Management System (Not avail-
able for SX10)
• VCS – Cisco Video Communication Server
• Callway –WebEx Telepresence (Not available for SX10)
• CUCM – Cisco Unified Communications Manager
• Auto - The system starts provisioning by first trying VCS,
then TMS and finally CUCM.
• Edge - Cisco UCM via Expressway
If you select Off, all configurations must be set manually on the
video system.
If you are changing a value setting,
you have to always click
save
to confirm the change.
Back to task overview
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Introduction
User interfaces
Set the required provisioning parameters
Which parameters to set depend on which infrastructure was selected.
TMS
1. It may be required to authenticate the video system with
Cisco TMS. If so, enter
respective input fields.
System
Configuration.
2. Enter the IP address or DNS name of the Cisco TMS server
in the
Address
heading.*
Mode
drop
3. Enter the
ing input field.
VCS
1. It may be required to authenticate the video system with
the Cisco VCS. If so, enter
respective input fields.
2. Enter the IP address or DNS name of the Cisco VCS in the
Address
3. Enter the SIP
ing input field.
Have a look at the
information about VCS provisioning.
CUCM
Enter the IP address or DNS name of the UCM provisioning
server in the
heading.*
You can find more details about setting up Cisco UCM provi-
sioning in the
Configuration
Configuration
LoginName
and
Password
input field under the
ExtermalManager
Path
to the provisioning service in the correspond-
LoginName
and
Password
input field under the
ExtermalManager
heading.
Domain
for the Cisco VCS in the correspond-
Cisco VCS provisioning
appendix for more
Address
input field under the
ExtermalManager
Administering TC endpoints on CUCM
24
Appendices
Cisco UCM via Expressway
Upon ordering the Cisco UCM via Expressway service, you have
received a username, password, adn domain name.
in the
1. Enter the username in the
2. Enter the password in the
3. Enter the domain name in the
ExtermalManager
heading.
In some cases, you must manually enter the Expressway
address. Enter the address you have received upon ordering
in the
Address
input field under the
WebEx Telepresence (formerly Callway)
in the
Upon ordering the Cisco WebEx Telepresence service, you have
received a
Video number
and an
If you do not have a video phone number and an activation code,
contact your company's WebEx Telepresence administrator.
1. Enter the Video number in the
2. Enter the Activation code in the
guide.
* The DHCP server can be set up to provide the External Manager address
automatically (Option 242 for TMS; Option 150 for UCM). Any input set up
here overrides the setting provided by DHCP.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Contacts
LoginName
input field.
Password
input field.
Domain
input field under the
ExternalManager
heading.
Activation
code.
LoginName
input field.
Password
input field.
Imprimer la page