Cisco Telepresence MX800 Manuel de remplacement - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de remplacement pour {nom_de_la_catégorie} Cisco Telepresence MX800. Cisco Telepresence MX800 46 pages. Wall-mounted mx800 single
Également pour Cisco Telepresence MX800 : Manuel de démarrage rapide (12 pages), Manuel d'installation (16 pages), Manuel de remplacement (47 pages), Manuel d'installation (30 pages), Pièces détachées (24 pages), Manuel d'installation (16 pages), Manuel de référence rapide (2 pages), Manuel (45 pages), Manuel (45 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages), Manuel de démarrage (46 pages)

Cisco TelePresence MX800 Single

Contents

Replace the dual camera module

Step 2: Remove loudspeakers from positions 2, 3, 5 and 6

The illustrations below show the loudspeaker in position 3

for the single camera version. Perform these steps for the

loudspeakers in positions 2, 3, 5 and 6 for the dual camera

version.

When reconnecting the loudspeakers, make sure to

connect the correct cable. The cables are marked with the

loudspeaker's position (see illustration). Note that position 4

is not in use.

Remove screw.

PT4x10, Torx T20

D15298.01 MX800 Single Replacement Guide, MARCH 2015.

Introduction

Grilles and covers

(page 2 of 7)

Pull loudspeaker 10-15 cm (4-6 inch) out.

Speakers and cameras

Loudspeaker

positions

Replacement Guide

Codec and monitor

Appendix

Unplug the cable from the connector

on the back of the loudspeaker.