Cisco Telepresence MX800 Manuel de démarrage - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco Telepresence MX800. Cisco Telepresence MX800 46 pages. Wall-mounted mx800 single
Également pour Cisco Telepresence MX800 : Manuel de démarrage rapide (12 pages), Manuel d'installation (16 pages), Manuel de remplacement (46 pages), Manuel de remplacement (47 pages), Manuel d'installation (30 pages), Pièces détachées (24 pages), Manuel d'installation (16 pages), Manuel de référence rapide (2 pages), Manuel (45 pages), Manuel (45 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages)

Cisco Telepresence MX800 Manuel de démarrage
Cisco TelePresence Video Systems
Contents
Configuration using the web interface
You have to use the Touch controller or the remote control for
the configurations, until you know your system's IP address.
Finding the IP address
Tap
Settings > System Information
on your Touch controller; or
navigate to
Home > Settings > System information
the remote control and on-screen menu.
In both cases you can find the IPv4 address and/or IPv6 address
of the system in the
Network
section.
Signing in to the web interface
1. Open a web browser and enter the system's IP address in
the address bar.
2. Enter your user name and password and click
The default user name is
admin
with no password set.
If you are not able to connect to the system:
• Make sure the system and computer are connected to the
same network.
• Make sure the system is switched on.
If the system has just been switched on, wait a few minutes to
allow the system to start up.
Back to task overview
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Introduction
User interfaces
if you use
Sign
In.
Configuration
Configuration
The web interface
23
Getting Started Guide
Appendices
Contacts
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.