Cisco TelePresence Profile 55 Manuel de démarrage - Page 24

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco TelePresence Profile 55. Cisco TelePresence Profile 55 46 pages. Telepresence ex, mx, quick set c20, codec c, sx20 quick set, profile series video systems
Également pour Cisco TelePresence Profile 55 : Manuel de démarrage (42 pages), Installation (2 pages)

Imprimer la page

Cisco TelePresence Video Systems

Contents

Provisioning set-up

(When using a provisioning system)

If in doubt for any of the parameters below, contact your provi-

sioning system provider.

See the administrator guide for your product, to find more

information about the provisioning settings.

Select provisioning infrastructure

1. Go to the

Configuration

tab, and click

2. Open the

Provisioning

settings from the left column.

3. Select a provisioning infrastructure from the

down list:

• TMS – Cisco TelePresence Management System (Not avail-

able for SX10)

• VCS – Cisco Video Communication Server

• Callway –WebEx Telepresence (Not available for SX10)

• CUCM – Cisco Unified Communications Manager

• Auto - The system starts provisioning by first trying VCS,

then TMS and finally CUCM.

• Edge - Cisco UCM via Expressway

If you select Off, all configurations must be set manually on the

video system.

If you are changing a value setting,

you have to always click

save

to confirm the change.

Back to task overview

D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.

Introduction

User interfaces

Set the required provisioning parameters

Which parameters to set depend on which infrastructure was selected.

TMS

1. It may be required to authenticate the video system with

Cisco TMS. If so, enter

respective input fields.

System

Configuration.

2. Enter the IP address or DNS name of the Cisco TMS server

in the

Address

heading.*

Mode

drop

3. Enter the

ing input field.

VCS

1. It may be required to authenticate the video system with

the Cisco VCS. If so, enter

respective input fields.

2. Enter the IP address or DNS name of the Cisco VCS in the

Address

3. Enter the SIP

ing input field.

Have a look at the

information about VCS provisioning.

CUCM

Enter the IP address or DNS name of the UCM provisioning

server in the

heading.*

You can find more details about setting up Cisco UCM provi-

sioning in the

Configuration

LoginName

and

Password

input field under the

ExtermalManager

Path

to the provisioning service in the correspond-

LoginName

and

Password

input field under the

ExtermalManager

heading.

Domain

for the Cisco VCS in the correspond-

Cisco VCS provisioning

appendix for more

Address

input field under the

ExtermalManager

Administering TC endpoints on CUCM

Appendices

Cisco UCM via Expressway

Upon ordering the Cisco UCM via Expressway service, you have

received a username, password, adn domain name.

in the

1. Enter the username in the

2. Enter the password in the

3. Enter the domain name in the

ExtermalManager

heading.

In some cases, you must manually enter the Expressway

address. Enter the address you have received upon ordering

in the

Address

input field under the

WebEx Telepresence (formerly Callway)

in the

Upon ordering the Cisco WebEx Telepresence service, you have

received a

Video number

and an

If you do not have a video phone number and an activation code,

contact your company's WebEx Telepresence administrator.

1. Enter the Video number in the

2. Enter the Activation code in the

guide.

* The DHCP server can be set up to provide the External Manager address

automatically (Option 242 for TMS; Option 150 for UCM). Any input set up

here overrides the setting provided by DHCP.

Getting Started Guide

Contacts

LoginName

input field.

Password

input field.

Domain

input field under the

ExternalManager

heading.

Activation

code.

LoginName

input field.

Password

input field.