Argo Extreme 11 Manuel d'utilisation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Argo Extreme 11. Argo Extreme 11 11 pages. Portable (local) air conditioner
Imprimer la page
(1) SIGNAL TRANSMITTER
(2) FUNCTION DISPLAY
(3) FUNCTION SELECTION BUTTON (FUNC)
Press this button to select the different operating modes, according to the following sequence:
Cooling
→
(4) TEMPERATURE ADJUSTMENT BUTTON
Increase (▲):
1) Enables the adjustment of the temperature desired in Cooling mode.
2) Each time the (▲) button is pressed, the temperature set increases by 1ºC; by holding the button pressed, the
temperature increases continuously.
Decrease (▼):
1) Enables the adjustment of the temperature desired in Cooling mode
2) Each time the (▼) button is pressed, the temperature set increases by 1ºC; by holding the button pressed, the
temperature increases continuously.
(5) ON/OFF BUTTON (POWER)
Press the POWER button to switch the unit on or off.
When switched on, the appliance will start to operate as it was last set (save function).
(6) " ECO" BUTTON ("economy" function)
1) By pressing the button once, the unit enters "eco" mode and the symbol
the button a second time, the unit leaves "eco" mode and the symbol disappears from the display.
2) When activating the "eco" function in Cooling mode, the temperature set increases automatically by 0.5ºC every
half hour for the next 2 hours: it then remains stable for the rest of the night.
3) Each time the electricity power supply is disconnected, "eco" mode is cancelled. To restore, simply press the
"ECO" button once. Each time the appliance is switched off, "ECO" mode is cancelled. To restore, simply press
the "ECO" button once.
(7) TIMER BUTTON (TIMER-ON/TIMER-OFF)
1）Timer-on (auto-on)
When the appliance is on stand-by, set the time remaining before the unit is to switch on can be set:
•
Select a number of hours from "1" to "24".
•
Press the TIMER button consecutively and the number of hours increases by 1 each time it is pressed, up to 24.
•
Press the Power button before the time expires and the setting will be cancelled and unit will start operating.
2）Timer-off (auto-off)
When the appliance is on, set the time remaining before the unit is to switch on can be set:
•
Select a number of hours from "1" to "24".
•
Press the TIMER button consecutively and the number of hours increases by 1 each time it is pressed, up to 24.
•
Press the Power button before the time expires and the setting will be cancelled and unit will switch off.
(8) SWING BUTTON
Press SWING key once, the leaves of air-outlet wave for 60°, if you press twice the leaves of air-outlet wave
for 80°, and if you press three times the leaves wave automatically.
The leaves close automatically while the unit is turned off
(9) HIGH BUTTON: selects high fan speed, HI appears on the display.
(10) MED BUTTON: selects medium fan speed, MED appears on the display.
(11) LOW BUTTON: selects low fan speed, LO appears on the display.
V 01/13
Dehumidification
→
(
Heating
(NOT ACTIVE) →
▲▼)
.
Fan
appears on the display; by pressing
18