Cisco TelePresence SpeakerTrack 60 Manuel - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cisco TelePresence SpeakerTrack 60. Cisco TelePresence SpeakerTrack 60 22 pages. Telepresence
Également pour Cisco TelePresence SpeakerTrack 60 : Fiche technique (3 pages), Manuel d'installation (19 pages), Manuel d'installation (14 pages), Manuel de l'appareil photo (40 pages), Manuel de l'appareil photo (44 pages)

Imprimer la page
Cisco TelePresence SpeakerTrack 60 Manuel
Cisco TelePresence Precision 60 and SpeakerTrack 60
Contents

Connect SpeakerTrack 60 to SX80 Codec

•
Connect the video cables to the codec's camera inputs
(HDMI 1 and 2).
•
Connect Ethernet to the codec's 2nd or 3rd Ethernet port.
•
Connect to power.
For further information about camera assembly and cabling,
refer to the SpeakerTrack 60 installation guide:
http://www.cisco.com/go/telepresence/docs
When using a SpeakerTrack 60 with a C Series codec, the
codec cannot be controlled with a Cisco Remote Control
TRC5. Instead, a Cisco TelePresence Touch 8 user interface
or an external control device must be used.
RJ45
HDMI 1 HDMI 2
D15296.03 Cisco TelePresence Precision 60 and SpeakerTrack 60, APRIL 2016.
Introduction
Physical interface
Power
(100-240 V
, 50/60 Hz)
AC
Connecting the camera
Connecting the camera
Power
adapter
Always use the provided power cable
and adapter (12 V
, minimum 3 A).
DC
11
Camera guide
Factory reset
Appendix
Copyright © 2016 Cisco Systems, Inc. All rights reserved.