Cisco TelePresence SX10 Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cisco TelePresence SX10. Cisco TelePresence SX10 38 pages. In-room control on touch 10
Également pour Cisco TelePresence SX10 : Manuel d'installation (8 pages), Manuel de l'utilisateur (26 pages), Manuel rapide (2 pages), Manuel de l'utilisateur (34 pages), Manuel de l'utilisateur (29 pages), Manuel d'utilisation préliminaire (9 pages), Manuel d'installation (8 pages), Manuel de l'utilisateur (2 pages), Manuel de l'utilisateur (37 pages), Manuel (45 pages), Manuel (45 pages), Manuel d'installation (2 pages), Manuel de l'utilisateur (34 pages), Manuel de l'utilisateur (5 pages), Manuel de l'utilisateur (38 pages), Manuel de l'utilisateur (38 pages), Manuel de démarrage (46 pages), Manuel rapide (2 pages)

Imprimer la page
Cisco TelePresence SX10 Manuel de l'utilisateur
Video Calls

Add Additional Participants to Existing Call

1
In a call, navigate to Add and press OK on
the remote control. This will put the current
call on hold.
4
The calls will now be merged together.
D1509712 User Guide
Cisco TelePresence SX10, SX20
Produced: June 2017 for CE9.1
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
2
Locate the participant to be added in the
usual way. Press OK.
5
Repeat the process to add more
participants, if needed.
3
Navigate to Add and press OK to expand
the call into a conference.
6
Press the red End Call button on the
remote control, or use the Cursor keys to
select End and then press OK to terminate
the call.
About
Video Conferences
Your video system network may
be equipped with the capability to
initiate a video conference with
several participants.
The maximum number of
participants supported by your
video system will depend on
system configuration and the video
infrastructure. If in doubt, contact
your video support team.
If you want to initiate a video
conference, you must call each
participant one by one.
If you are the one who initiated
the conference you will be able to
terminate the entire conference.
The other participants may only
disconnect themselves from the
conference.
Call settings. Those you call may
have video systems with different
bandwidths. You are not constrained
to set all participants to a bandwidth
that all systems support. The Call
rate may be set individually for all
participants in order to provide
everyone with the best quality
available for their system. See
"Edit
the Call Rate, then Place the Call"
on page
11.
13