Cisco TelePresence SX10 Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cisco TelePresence SX10. Cisco TelePresence SX10 38 pages. In-room control on touch 10
Également pour Cisco TelePresence SX10 : Manuel d'installation (8 pages), Manuel de l'utilisateur (26 pages), Manuel rapide (2 pages), Manuel de l'utilisateur (34 pages), Manuel de l'utilisateur (29 pages), Manuel d'utilisation préliminaire (9 pages), Manuel de l'utilisateur (38 pages), Manuel d'installation (8 pages), Manuel de l'utilisateur (2 pages), Manuel de l'utilisateur (37 pages), Manuel (45 pages), Manuel (45 pages), Manuel d'installation (2 pages), Manuel de l'utilisateur (34 pages), Manuel de l'utilisateur (5 pages), Manuel de l'utilisateur (38 pages), Manuel de démarrage (46 pages), Manuel rapide (2 pages)

Imprimer la page
Cisco TelePresence SX10 Manuel de l'utilisateur
Video Calls

Place a Call Using Name, Number, or IP-Address

1
Make sure Call is selected (the leftmost icon
along the bottom of the screen) and press
OK on the remote control or press the
green Call button on the remote control.
4
To use the virtual keyboard, navigate down
to and about the keyboard and select
characters. Press OK to select a character.
D15097.22 Cisco TelePresence SX10, SX20 User Guide APRIL 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
Use the Cursor keys to navigate to the
Search or Dial field at the top of the menu.
Press OK.
5
Then press the green Call button on
the remote control to place the call.
Alternatively, navigate to the Call icon and
press OK.
3
To enter numbers select 123.
6
Press the red End Call button on the
remote control, or use the Cursor keys
to select End Call and then press OK to
terminate the call.
About Placing Calls
You can call someone who is not
listed in your list of contacts by
keying in their name, address or
number using the virtual keyboard.
Anyone you have previously called
appears in the Recents list and you
can then add any of them to your list
of Favorites. This is described in the
section Contacts.
Call Using Video Address
The procedure when using an IP
type video address to call someone
is similar. Just key in the address
and use
(the asterisk button in
*
the lower left corner on the remote
control) as separator. The device
interprets this as a valid IP address
separator so that the video address
appears as correctly entered.
11