Sony 1080i Manuel d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony 1080i. Sony 1080i 40 pages. Digital camcorders: high definition camcorder
Également pour Sony 1080i : Manuel d'utilisation (40 pages)

Imprimer la page

Cleaning

Unplug the set from the wall outlet before

cleaning or polishing it. Do not use liquid cleaners

or aerosol cleaners. Use a cloth lightly dampened

with water for cleaning the exterior of the set.

Installation

Water and Moisture

Do not use power-line operated sets near water –

for example, near a bathtub, washbowl, kitchen

sink, or laundry tub, in a wet basement, or near a

swimming pool, etc.

Power-Cord Protection

Route the power cord so that it is not likely to be

walked on or pinched by items placed upon or

against them, paying particular attention to the

plugs, receptacles, and the point where the cord

exits from the appliance.

Accessories

Do not place the set on an unstable cart, stand,

tripod, bracket, or table. The set may fall, causing

serious injury to a child or an adult, and serious

damage to the set. Use only a cart, stand, tripod,

bracket, or table recommended by the

manufacturer.

Ventilation

The slots and openings in the cabinet are provided

for necessary ventilation. To ensure reliable

operation of the set, and to protect it from

overheating, these slots and openings must never

be blocked or covered.

– Never cover the slots and openings with a cloth

or other materials.

– Never block the slots and openings by placing

the set on a bed, sofa, rug, or other similar

surface.

– Never place the set in a confined space, such as

a bookcase, or built-in cabinet, unless proper

ventilation is provided.

– Do not place the set near or over a radiator or

heat register, or where it is exposed to direct

sunlight.

Lightning

For added protection for this set during a lightning

storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system.

This will prevent damage to the set due to

lightning and power-line surges.

Service

Damage Requiring Service

Unplug the set from the wall outlet and refer

servicing to qualified service personnel under the

following conditions:

– When the power cord or plug is damaged or

frayed.

– If liquid has been spilled or objects have fallen

into the set.

– If the set has been exposed to rain or water.

– If the set has been subject to excessive shock by

being dropped, or the cabinet has been

damaged.

– If the set does not operate normally when

following the operating instructions. Adjust

only those controls that are specified in the

operating instructions. Improper adjustment of

other controls may result in damage and will

often require extensive work by a qualified

technician to restore the set to normal operation.

– When the set exhibits a distinct change in

performance – this indicates a need for service.

Servicing

Do not attempt to service the set yourself as

opening or removing covers may expose you to

dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

Replacement parts

When replacement parts are required, be sure the

service technician has used replacement parts

specified by the manufacturer that have the same

characteristics as the original parts.

Unauthorized substitutions may result in fire,

electric shock, or other hazards.

Safety Check

Upon completion of any service or repairs to the

set, ask the service technician to perform routine

safety checks (as specified by the manufacturer)

to determine that the set is in safe operating

condition.