Sony BRC-X400 Liste des commandes - Page 27
Parcourez en ligne ou téléchargez le pdf Liste des commandes pour {nom_de_la_catégorie} Sony BRC-X400. Sony BRC-X400 41 pages. Srt introduction
Également pour Sony BRC-X400 : Manuel (15 pages), Manuel technique (15 pages)
Imprimer la page
Inquiry Command List (6/6)
Number in ( ) is MENU display values.
Inquiry Command
SYSTEM
VIDEO FORMAT
SELECTABLE
VIDEO FORMAT
SELECT
VIDEO FORMAT
STATUS
H PHASE
IR RECEIVE
IMG FLIP
COLOR BAR
OVERLAY NAME
CAMERA ID
CAMERA
GENERATION
HDMI
COLOR SPACE
MENU
ON/OFF
OSD
POWER
ON/STANDBY
STANDBY MODE
SOFTWARE
-
VERSION
(CAM_VersionInq)
*1
Only available for BRC-X400/X401.
*2
Aligned to the right end when IMAGE FLIP is Off, and aligned to the left end when IMAGE FLIP is On.
Inquiry Packet
8x 09 7E 04 31 FF
8x 09 7E 04 32 FF
8x 09 7E 04 33 FF
*1
8x 09 7E 01 3E FF
8x 09 06 08 FF
8x 09 04 66 FF
*1
8x 09 04 7D FF
*1
8x 09 7E 04 77 FF
8x 09 04 22 FF
8x 09 7E 04 30 FF
8x 09 7E 01 03 FF
8x 09 06 06 FF
8x 09 7E 04 76 0p
FF
8x 09 04 00 FF
8x 09 7E 04 50 FF
8x 09 00 02 FF
Reply Packet
y0 50 0p FF
y0 50 0p 0p FF
y0 50 0p 0p FF
y0 50 00 0p 0p 0p
FF
y0 50 0p FF
y0 50 0p FF
y0 50 0p FF
y0 50 0p FF
y0 50 0p 0p 0p 0p
FF
y0 50 0h 0k 0m 0n
0p 0q 0r 0s 0t 0u
uu 0v vv FF
y0 50 0p FF
y0 50 0p FF
y0 50 0q FF
y0 50 0p FF
y0 50 0p FF
y0 50 pp pp qq qq
rr rr 0s FF
27
Comments
Whether the setting can be
changed by the command of the
Video output method (video
format) or not.
p: 2=Available, 3=Not available
pp: Video Format
For pp, refer to the section of the
Video output method (video
format) of VISCA Command
Setting Values
Current status of the Video
output method (video format)
pp: Video Format
For pp, refer to the section of the
Video output method (video
format) of VISCA Command
Setting Values
ppp: Phase difference adjusted
value (000 - 3BF)
p: 2=On, 3=Off
p: 2=On, 3=Off
p: 2=Color Bar On, 3= Color Bar
Off
p: 2=Overlay Name On,
3=Overlay Name Off
pppp: Camera ID (0000 - FFFF)
h: Number of camera generation
k-t: 0 fixed
0uuu: Model ID
0vvv: Model ID of the similar
model when operating with a
remote controller
p: 0=YCbCr, 1=RGB
p: 2=On, 3=Off
p: 0=SDI, 1=HDMI
q: 2=OSD On, 3=OSD Off
p: 2=On, 3=Standby
p: 2=Side (When Standby is
executed, move the Pan to the
*2
end point
and the Tilt to 0°),
3=Neutral
pppp: Vendor ID
qqqq: Model Code
rrrr: ROM version
s: Socket Number