Sony BVP-E30 series Manuel - Page 31
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Sony BVP-E30 series. Sony BVP-E30 series 34 pages. Sdtv portable cameras
Également pour Sony BVP-E30 series : Manuel d'utilisation (36 pages), Brochure & Specs (14 pages), Manuel d'utilisation (38 pages)
Imprimer la page
5-1. Preview Function Overview
The RCP of the Joystick (lever) type has the Preview switch. ON/OFF status of the Preview switch can be obtained from
the interface connector. This signal can be obtained from the RCP. However, linking the signal to the assigned CCU/HDCU
number becomes diffi cult when the RCP assignment function is used.
This signal can also be obtained from the interface connector of CCU/HDCU by the setting. Then, the signal is linked
automatically since the information is supplied from the CCU/HDCU that controls the RCP. This function is also effective
when CNU is connected.
5-2. Setting Method at RCP
Output signal from the RCP is turned ON only when the Preview switch is pressed. However, output signal from the CCU/
HDCU is controlled by the two modes. In one mode, output is turned ON only when the Preview switch is pressed. In the
other mode. ON and OFF of the output are toggled by every pressing of the Preview switch.
RCP-920/921
< P R E V I E W >
> C O N T A C T :
C C U :
S - B U S :
RCP-750/751
Preview Setting
Preview Direction
RCP
CCU
CNU
S-BUS
Camera Network System
Section 5
Preview
Item
O N
CONTACT
O F F
O F F
CCU
S-BUS
Item
Exit
RCP
CCU
CNU/S-BUS Not supported by the network connection
Function
Signal is output from EXT I/O of the RCP when
set to ON
Signal is output from CCU/HDCU when set to ON
Not supported by the network connection
Function
Signal is output from EXT I/O of the RCP when
set to ON
Signal is output from CCU/HDCU when set to ON
5-1 (E)