DigiTech XC-0328 Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DigiTech XC-0328. DigiTech XC-0328 8 pages. Wireless indoor / outdoor 8-channel thermo-hygrometer with jumbo display
Imprimer la page
4.
Display
Features
4.'t
Comfort
lcon
The comfort icon is based
on
humidity ranges specified
in Figure
7
.
The
icon
is
displayed
for
indoor.humidity, remote channel
t
humidity
and optional remote channels 2 through 8 humidity.
Figure
7
4.2
Rate
of
Change lcon
The
rate
of change
icon
[4-l
detects
rapid changes
in
temperature and
humidiry
lf
the arrow points
upward,
the temperature is
increasing
at
a
rate of +2"C per 30 minutes (or
greater),
or humidity is
increasing
at
a
rate
of +5% per 30 minutes
(or
greater).
lf
the arrow points
downward,
the
temperature
is
decreasing at a rate of
-2"C
per 30 minutes (or less),
or humidity
is
decreasing at a rate of
-5%
per 30 minutes (or less).
5.
Gonsole Operation
,--
Note: The
console
has three
buttons
for
easy
operation:
MIN/MAX/-
button,
CLEAR/ADJUST
button, and
CHANNEU+
button.
5.1
Min/Max Mode
The Min/Max mode displays the minimum and maximum
temperature
and humidity (since reset of the unit) for the
indoor,
remote channel
1
through 8 sensors.
Prior
to entering the MIN/MAX
mode, press
the CHANNEU+
button to
select the temperature and humidity values you wish to view.
1.
Display Maximum.
Press
the MIN/MAX
button once
to
display
the
maximum.
The
MAX icon
will
be displayed.
2.
Clear Maximum.
To
reset the maximum values
to
the
current
values, press and hold the
CLEAR
button
for
3 seconds.
3.
Display Minimum.
Press
the
MIN/MAX button again
to
display the
minimum.
The
MIN icon
will
be
displayed.
4. Clear Minimum.
To reset
the
minimum values
to the
current
values, press
and
hold
the CLEAR
button for 3 seconds.
To
return
to
normal mode, press
the MIN/MAX
button again.
5.2
lndoor/Outdoor
Channel
Selection
Press
the CHANNEU+
button
to
switch
the display
between
lhe
indoor
temperature and
humidityE,
remote sensors 1 through 8, and
scroll
modeQ..
ln scroll mode, all of
the
indoor and detected outdoor sensors
will
be displayed
in
five
second intervals.
5.3
Temperature Units of Measure
The default temperature units of measure are degrees Celsius.
To
toggle
between
degrees Celsius and degrees
Fahrenheit,
press and hold
the
MIN/MAX button for
3
seconds.
5.4
Sensor Search Mode
lf any of the sensor communication is lost, dashes
G-.-)
will
be displayed
on the screen.
To
reacquire the signal:
1.
lf a
specific channel
is
lost,
press
the
CHANNEU+ button
to
display thrs channel,
then
Press
and
hold
the CHANNEU+
button
for 3
seconds, and
the
remote
search
iconq}z
will be
constantly
displayed
for
up
to
10 minutes. Once the signal
is
reacquired, the
remote search
icon\7will
turn off, and
the
current values
will
be
displayed.
2. lf
new sensors are added, subtracted,
or
multiple sensor channels
are
lost, press
the
CHANNEU+ button until
the
indoor
channel
isEdisplayed.
Press
and
hold
the
CHANNEU+ button
for
3
seconds,
and
the
remote search
icon
9
will be
constantly
displayed
for
up
to
10 minutes. Once
the
signal is reacquired, the
remote search
icon
9
will turn off, and the current values
will
be
displayed.
5.5
Best
Practices for Wireless Communication
Wireless communication is susceptible
to
interference, distance, walls
and
metal barriers.
We
recommend
the
following
best
practices for
trouble free wireless communication.
-9-
1
)
)
\
. ,)
RH<45%
RH45%-65%
RH>65%
C-)
o
@
Dry
Comfortable
Wet