DigiTech XC-0430 Manuel d'instruction - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} DigiTech XC-0430. DigiTech XC-0430 18 pages. Professional wireless rain gauge with 4” lcd
Également pour DigiTech XC-0430 : Manuel de l'utilisateur (7 pages)
Imprimer la page
11.1 To set the Hi / Lo alert
1. Press [ ALERT ] key to until the desired area is selected.
2. Use [UP] / [ DOWN ] keys to adjust the setting.
3. Press [ALERT]
11.2 To enable / disable the Hi / Lo alert
1. Press [ALERT] key until the desired area is selected.
2. Press [ALARM ] key to turn the alert on or off.
3. Press [ALERT] key to continue to next setting.
Note:
1. The unit will automatically exit setting mode in 60 seconds if no key is pressed.
2. When alert alarm is on, the alert LED indicator, the area and type of alarm that triggered the
3. To silence the alert alarm beeping, press the [SNOOZE / LIGHT] key, or let the beeping alarm
automatically turn off after 2 minutes.
12. Wireless signal reception
No sensor
Signal searching
Strong signal
Weak signal
Signal lost
The wireless sensor is capable of transmitting data over an approximate operating distance of
150m range (line of sight).
Occasionally, due to intermittent physical obstruction or other environment interference, the signal
may be weaken or lost.
In the case that the sensor signal is lost completely, you will need to relocate the display main unit
or the wireless sensor closer to each other.
12