Cisco TelePresence SX20N Manuel de référence

Parcourez en ligne ou téléchargez le pdf Manuel de référence pour {nom_de_la_catégorie} Cisco TelePresence SX20N. Cisco TelePresence SX20N 4 pages.

Imprimer la page
Cisco TelePresence SX20N Reference Guide

TECHNICAL SUPPORT 1-866-454-6861

Ensure that the power cable is
1
plugged into the power outlet in the
wall.
Confirm that the network cable is
plugged into the network outlet in the
2
wall. The network cable must be
plugged into a dedicated OTN network
outlet.
Verify that the power bar is turned
on. The power bar supplies the whole
3
system and you can turn off your system
here at the end of your session.
Ensure that the monitor is on.
4
Check that the codec/camera is on
5
by checking the LED light at the front
of the codec
Pick up the remote control and
unmute your videoconferencing sound
6
by pressing the "Mic Off" button on the
remote control.
Turn the Self view on by navigating to
7
the camera icon using the remote
arrows and selecting the thumb tac icon.