Cisco TelePresence Touch 10 Manuel de l'utilisateur - Page 41
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cisco TelePresence Touch 10. Cisco TelePresence Touch 10 45 pages. Ce 9.3, systems
Également pour Cisco TelePresence Touch 10 : Manuel d'installation (6 pages), Manuel d'installation (12 pages), Manuel d'installation (2 pages)
Imprimer la page
Camera
Move the Selfview PiP
1
Tap and hold the selfview image.
3
Drag the image to a new position, shown here is
the upper left corner.
D1534509 Cisco TelePresence User Guide
Systems using Touch10
Produced: March 2018 for CE9.3
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved
2
The selfview image will now turn blue. You
will also see the alternate positions available
for the selfview image. Keep holding the
image.
4
Release the image by lifting your finger from the
screen. The selfview image has now assumed its
new position.
Why Move the Selfview?
Selfview shows what others see
from your video system. You will
normally use it to confirm that they
see what you want them to see.
The selfview appears as a PiP
(Picture-in-Picture).
From time to time you may want
to have the selfview activated
during the meeting. This could, for
example, be to ensure that you
remain seen on the screen.
It may happen that the current
position of the selfview blocks
important parts of the image on your
screen. You may therefore want to
move it.
41