Cisco UC500 series Manuel de configuration - Page 30

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Cisco UC500 series. Cisco UC500 series 50 pages. Sip trunking unified communications 500 series

Imprimer la page

Cisco UC500 series Manuel de configuration

4.3.20 Click on the

"SIP Trunk Parameters"

and fill the parameters as required or

supplied by the SP during customer provisioning. In this example – the below are

entered:

Service Provider: Choose "Generic SIP Trunk Provider" from the dropdown

Registrar Server: Enter IP or domain name of registrar server if any (this is where the

SIP register messages would be sent to)

MWI Server: Fill this only if you need centralized voicemail.

Proxy Server: Enter IP or domain name of proxy server (this is where the SIP INVITE

messages would be sent to – can be the same as Registrar server)

Digest Authentication: Enter username / password supplied by the SP if any. Typically

the username is the main DID number (such as the Auto Attendant)

Figure 4.3.20 SIP Trunk parameters