Argo MADISON Manuel d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Argo MADISON. Argo MADISON 20 pages. Local

This appliance automatically vaporizes the condensation in cooling.

When the air conditioner operates in Cooling, it is not necessary to have continuous condensate drainage; only in

particular climatic conditions in which the air humidity is very high, it can happen that water is deposited inside the unit.

When the internal tank is full, the air conditioner will emit 8 beeps and the display will show the message "FL",

signaling the filling and blocking the operation of the device.

Dehumidification

WARNING!

When using the air conditioner in dehumidification mode, we recommend always ensuring continuous drainage, in

order to maximise dehumidification efficiency.

Use the drainage outlet on the appliance. The water can be drained into a drain by simply connecting the supplied

drainage tube.

Remove the cap then remove the plug.

Avoid bends in the drainage tube. When you want to stop continuous drainage, always replace the rubber plug and

cap.

V 01/22

HOW TO ELIMINATE CONDENSATE

Cooling

When the unit operates in the cooling mode, ensure that the rubber cap

closing the drainage opening on the back of the appliance is properly

positioned.

To empty the container, switch the air conditioner off and unplug the cord.

Remove the cap from the rear drainage opening and place its end over a

normal drain. Ensure that the tube is not twisted or bent. The tube must

slope downwards. Re-close the drainage opening with the cap, insert it

into the clamp and resume use of the air conditioner.

Next, insert the drainage tube into the connection tube.