Argo POLIFEMO BILLY Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Argo POLIFEMO BILLY. Argo POLIFEMO BILLY 9 pages. Evaporative air cooler

Imprimer la page

ON/OFF BUTTON

In power on state, press this button, the unit turns off and enters standby mode.

In power off state, press this button and it turns on.

SPEED BUTTON

In power state, press the SPEED button to switch among low, medium and high level.

COOL/HUMIDITY BUTTON

Press this button to turn on or turn off the "Cooler/Humidifier" mode: the LED lights up.

MODE BUTTON

In power on state, press this button to switch the working mode among Normal, Natural and Sleep.

Normal mode: the unit runs at a constant speed setting;

NATURAL mode: the unit runs at changing wind speed as set by the factory. In this mode the ventilation can be

changed and the correspondent Led will light on the display.

Sleep mode: the unit runs at changing wind speed as set by the factory. In this mode the ventilation can be changed

and the correspondent Led will light on the display.

SWING BUTTON (OSC)

In power state, press this button to switch on/off the vertical and/or horizontal swinging of the flaps.

TIMER BUTTON

After turning on, the timer indicator is turned off by default and the digital tube displays ambient temperature; when the

button is first pressed, the timer sets to 1 hour; the time increases by 1 hour when the button is pressed every time, and

the timer can be set up to 8 hours; if the button is pressed again, the digital tube displays the room temperature, and the

timer turns off; press the button again to repeat the cycle;

HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the diagram below)

Open the battery cover on the back of the remote control (press and pull the cover).

Place the battery inside the cover, making sure the polarity is correct.

Slot the cover back into position on the remote control.

Use Lithium/Manganese button cells, model no. CR2025 -3 V, compliant with Battery

Directive no. 2006/66/EC (supplied with the remote control).

INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EUROPEAN DIRECTIVE

2006/66/EC

Please replace the battery when its electrical charge has been exhausted: at the end of its useful life, it must not be disposed of

together with unsorted waste. It must be must be delivered to appropriate separated waste disposal plants or to dealers that

provide a similar service. Separate waste disposal of batteries prevents potential negative effects on the environment and human

health resulting from inadequate disposal, and also allows the materials from which it is made to be recovered and recycled in

order to achieve significant savings in terms of energy and resources. The separate disposal obligation is underlined by the

crossed-out dustbin symbol appearing on the battery. Illegal disposal of the product by the user shall result in the application of

administrative sanctions as defined by current regulations.

V 12/18