Argo POLIFEMO ZEUS Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Argo POLIFEMO ZEUS. Argo POLIFEMO ZEUS 11 pages. Evaporative air cooler

Imprimer la page

1. How to Use the Appliance

MEMORY FUNCTION

With the power cord connected, when you turn on the unit by pressing the ON / OFF button, it will start to work with the last

settings selected before turning off, with the exception of the Timer and Sleep functions, which cannot be stored.

When the unit is switched on again, it will operate at medium ventilation speed, and then switch after 3 seconds to the

ventilation mode selected before switching off.

PARTIAL DISPLAY LIGHTING DEACTIVATION FUNCTION

If no selection is made on the control panel, after 1 minute the intensity of the display lighting is reduced to 33%: by touching

any key, the LEDs return to full light intensity.

The buttons on the remote control correspond to the functions on the control panel.

On the remote control there is also the button that allows the deactivation of the LEDs on the control panel of the appliance.

HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the diagram below)

Open the battery cover on the back of the remote control (press and pull the cover).

Place the battery inside the cover, making sure the polarity is correct. Slot the cover back into position on the remote

control.

Use Lithium/Manganese button cells, model no. CR2032 -3 V, compliant with Battery Directive no. 2006/66/EC and

modification of Directive 56/2013/UE (supplied with the remote control)

V 01/21