Argo SWAN EVO Manuel d'utilisation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Argo SWAN EVO. Argo SWAN EVO 16 pages.

Imprimer la page

(7) SLEEP BUTTON

In cooling mode, press the UP and FAN buttons to activate the Sleep mode, after which the unit will return to

the silent mode and save energy.

N.B.:

The Sleep function is not available in the dehumidifying or fan modes.

(8) TEMPERATURE AND ERROR DISPLAY

Problem

Cause

Tank full of water.

Room temperature sensor failure.

Failure of temperature sensor on the

evaporator.

WARNING!

Before carrying out any cleaning or maintenance operations, unplug the appliance.

1. Cleaning the air filters

Use a vacuum cleaner to remove the dust from the filters.

Should this not suffice, wash the filter with lukewarm water

and some neutral detergent (if necessary), then rinse it

thoroughly in cold water and leave it to dry in air before

putting it back in place. Once the filter has been replaced,

close the grille and resume use of the air conditioner.

2. Cleaning the casing.

Use a damp and soft cloth to clean the outer surface of the appliance.

Do not use excessively hot water, solvents, petrol or other aggressive chemical compounds, talcum powder or brushes:

these may damage the surface or colour of the casing.

Remove any stains using lukewarm water with a little neutral detergent.

Do not pour water onto the air conditioner to clean it, as this may damage its internal components or cause a short-circuit.

3. Storage.

When the air conditioner is not expected to be used for a long time, clean the filters before storing it away.

Keep the appliance in a vertical position at all times. Do not place heavy objects on top of the air conditioner. It is advisable

to protect the appliance with a plastic sheet.

4. Transport.

Transport the air conditioner in the vertical position.

Should this not be possible, rest it on its right-hand side; when the

appliance reaches its final destination, place it immediately in the

vertical position and wait at least 4 hours before operating it in cooling

mode.

V 06/20

Solution

Empty the tank.

If the problem persists, contact a service centre.

Contact a service centre.

CARE AND MAINTENANCE

The air filters must be checked at least once every two

拆除固定螺丝

weeks of use. Operating the appliance with dirty or

clogged filters will decrease the air conditioner's efficiency

and may cause serious problems.

To remove the upper filter, loosen the central screw and

pull the grille's lever.