DIGITECH Audio GE4136 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DIGITECH Audio GE4136. DIGITECH Audio GE4136 3 pages. Turntable player

Imprimer la page

TURNTABLE OPERATION

Note:

1. Do not resist or turn the platter manually.

2. Moving or jarring the turntable without securing the Tone Arm in its Holder

could result in damage to the Tone Arm.

3. Replace the protective cap on the stylus when not in use.

Preparation

Open the Record Player Cover, release the Tone arm Clamp and remove the stylus protector.

Listening to Records

1. Set the Function Selector to the PHONO position.

2. Place a record on the turntable, over the central spindle. Place the EP (45 RPM) adapter over the central

spindle when playing 17cm EP records.

3. Set the Speed Selector to 33 or 45 or 78 rpm according to the record.

4. Release the Tone Arm Holder and remove the protective cap from the stylus.

5. Lift the Tone arm with the Tone Arm Lift Lever.

6. Move the tone arm to the beginning of the record or to the start of a particular track.

7. Gently lower the tone arm onto the record with the Tone Arm Lift Lever to start playing.

8. When the record is finished, the tone arm will automatically stop (if the Auto-Stop Selector is set to ON).

Lift the tone arm from the record and return it to the rest.

9. To stop play manually, lift the tone arm from the record and return it to the rest.

10. With some records, Auto-Stop may not function as expected; for those records, set Auto-Stop to OFF

and stop playback manually as described above.

BASS BOOST

Turn Bass Boost control to desired Bass Boost effect.

LINE-OUT SOCKET / INTERNAL SPEAKER (ON/OFF) SELECTOR

You can connect the unit to external speakers (4 ohm, not included) by connecting up the Line-out L,R

sockets. Before connection, ensure internal speaker selector switched to OFF position.

HEADPHONE

This unit will accept stereo headphones (not included) with a 3.5mm plug and an impedance of 8 ohm or

greater. The speakers are automatically disconnected when headphones are connected to the Phone Jack.

SPECIFICATIONS

Power Supply

Power consumption

: AC240V ~ 50Hz

: 25W