Cisco 3110 Pour commencer - Page 7

Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} Cisco 3110. Cisco 3110 42 pages.
Également pour Cisco 3110 : Manuel (42 pages)

Imprimer la page

Getting Started

Feature

Use FDM to configure the

Firepower Threat Defense for

management by a FMC.

Automatically update CA bundles

FTD REST API version 6.2 (v6).

Logging Into the System

There are two interfaces to the Firepower Threat Defense device:

FDM Web Interface

The FDM runs in your web browser. You use this interface to configure, manage, and monitor the system.

Description

When you perform initial setup using FDM, all interface configuration

completed in FDM is retained when you switch to FMC for management,

in addition to the Management and FMC access settings. Note that other

default configuration settings, such as the access control policy or

security zones, are not retained. When you use the Firepower Threat

Defense CLI, only the Management and FMC access settings are retained

(for example, the default inside interface configuration is not retained).

After you switch to FMC, you can no longer use FDM to manage the

Firepower Threat Defense.

New/Modified screens: System Settings > Management Center

The local CA bundle contains certificates to access several Cisco

services. The system now automatically queries Cisco for new CA

certificates at a daily system-defined time. Previously, you had to

upgrade the software to update CA certificates. You can use the CLI to

disable this feature.

This feature is not supported in Version 7.0.0–7.0.4,

Note

7.1.0–7.1.0.2, or 7.2.0–7.2.3. If you upgrade from a

supported version to an unsupported version, the feature

is temporarily disabled and the system stops contacting

Cisco.

New/modified CLI commands: configure cert-update auto-update,

configure cert-update run-now, configure cert-update test, show

cert-update

For more information, see the

Command

Reference.

The Firepower Threat Defense REST API for software version 7.1 is

version 6.2. You can use v6 in the API URLs, or preferentially, use

/latest/ to signify you are using the most recent API version that is

supported on the device. Note that the URL version path element for

6.2 is the same as 6.0/1: v6.

Please re-evaluate all existing calls, as changes might have been mode

to the resource models you are using. To open the API Explorer, where

you can view the resources, log into FDM, then click the more options

button ( ) and choose API Explorer.

Logging Into the System

Cisco Secure Firewall Threat Defense

Getting Started