Cisco 3110 Manuel - Page 30

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cisco 3110. Cisco 3110 42 pages.
Également pour Cisco 3110 : Pour commencer (42 pages)

Imprimer la page

Supported SFP/SFP+/QSFP+ Transceivers

Warning

Statement 1057 Hazardous Radiation Exposure

Use of controls, adjustments, or performance of procedures other than those specified may result in

hazardous radiation exposure.

Warning

Use appropriate ESD procedures when inserting the transceiver. Avoid touching the contacts at the rear, and

keep the contacts and ports free of dust and dirt. Keep unused transceivers in the ESD packing that they were

shipped in.

Caution

Although non-Cisco SFPs are allowed, we do not recommend using them because they have not been tested

and validated by Cisco. Cisco TAC may refuse support for any interoperability problems that result from

using an untested third-party SFP transceiver.

The following table lists the supported transceivers for the fixed ports on all 3100 models, and the

FPR3K-XNM-8X10G and FPR3K-XNM-8X25G network modules.

Table 4: Supported 1-Gb SFP Transceivers

Optics Type

1G, 1000Base-T

1G multimode

1G single mode

1G SM extended r.

1G SM

The following table lists the supported transceivers for the fixed ports on all 3100 models and the

FPR3K-XNM-8X10G and FPR3K-XNM-8X25G network modules.

Table 5: Supported 10-Gb SFP Transceivers

Optics Type

10G-SR

10G-LR

10G-ER

10G-ZR

Overview

PID

GLC-TE

GLC-SX-MMD

GLC-LH-SMD

GLC-EX-SMD

GLC-ZX-SMD

PID

SFP-10G-SR

SFP-10G-SR-S

SFP-10G-LR

SFP-10G-LR-S

SFP-10G-ER-S

SFP-10G-ZR

Overview

Comments

1 Gb-copper SFP

850 nm

1310 nm

40 km

80 km

Comments

—

Ethernet only

—

Ethernet only

—