Sony XDCAM PDW-HR1 Manuel d'utilisation - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony XDCAM PDW-HR1. Sony XDCAM PDW-HR1 49 pages. Sxs memory card adaptor
Également pour Sony XDCAM PDW-HR1 : Brochure & Specs (28 pages), Brochure (4 pages), Manuel d'installation (16 pages)

Imprimer la page
Sony XDCAM PDW-HR1 Manuel d'utilisation
Playback and Clip
Operations

Playback

Limitations
Seamless playback between clips is not guaranteed when
16-bit × 8 ch clips and 24-bit × 4 ch clips in the IMX50
format are recorded continuously.

Playback settings

Set the following item before starting playback.
Time data
On the HOME page of the function menu, set CNTR SEL
to "TC" (timecode) or "UB" (user bits).

Executing playback

1
Insert a memory card containing recorded clips into a
memory card slot.
When two SxS memory cards are loaded
Press the SLOT button on the SxS page of the function
menu to select the card (A or B) to play.
2
With the SHIFT button held down, press the EDIT/
HYBRID button.
The PDW-HR1 enters hybrid mode, and the
MEMORY button lights.
3
Press the PLAY button.
Playback of the SxS memory card starts.
To display information such as the remaining
capacity of the recording media and time data
Set DISPLAY on the SxS page of the function menu to
"ON".
Chapter
To stop play
Press the STOP button.
To pause play
Press the PAUSE button. Press the PAUSE button
again to restart play.
To play at high speed
High-speed search in the forward direction: With
the PLAY button held down, press the NEXT
button.
High-speed search in the reverse direction: With the
PLAY button held down, press the PREV button.
To set shot marks
HD
During playback, you can set a Shot Mark1 or Shot Mark2
essence marks by holding down the V/MARK1 or v/
MARK2 button and then pressing the PUSH SET knob or
the SET button.
Notes
• Shot marks cannot be recorded when the recording
media is write protected.
• Shot marks cannot be recorded at the ends of clips.
3
17
Playback