Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules Notes d'installation - Page 17

Parcourez en ligne ou téléchargez le pdf Notes d'installation pour {nom_de_la_catégorie} Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules. Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules 24 pages. 40-gigabit and 100-gigabit cfp transceiver modules

Imprimer la page

If you need to remove a CFP transceiver, follow these steps:

Disconnect the network fiber-optic cable from the CFP transceiver connectors. Immediately reinstall the

Step 1

dust plugs in the CFP transceiver optical bores.

Loosen the two captive installation screws that secure the CFP to the networking module.

Step 2

Slide the CFP transceiver out of the module socket. (See

Step 3

transceiver in antistatic protective packaging.

Figure 9

Captive installation

Optical bore

dust plugs

OL-23946-01

Removing a CFP Transceiver Module

screws

Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules Installation Note

Removing the CFP Transceiver

Figure

9.) Immediately place the CFP