Argo blues Manuel d'utilisation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Argo blues. Argo blues 10 pages. Electric convector heater with glass panel
Imprimer la page
FRONT VIEW
A. Delivery/intake grille
B. Feet with wheels
C. ON/OFF switch
The convector can be used on the floor, after assembling the feet, or alternatively it can be wall-mounted using the
specific accessories supplied.
MONTARE I PIEDINI IN DOTAZIONE
A. Floor portable using: how to assemble the feet with wheels supplied
The convector is packed without feet. These must therefore be assembled before using the appliance.
Assemble the feet as shown in the figure and put the convector in an upright position. Position the unit on a flat,
stable surface and stop the wheels with the proper wheels locks before turning it on.
1. Turn the convector upside down and
loosen the wing nuts.
B.
Wall-mounting: how to assemble the rear bracket and mount the convector onto the wall
The convector packaging contains all the accessories necessary for wall-mounting.
To wall-mount, proceed as follows:
Remove the rear bracket from the back of the unit as described in the pictures below.
V 09/16
DESCRIPTION OF PARTS
A
HOW TO INSTALL THE APPLIANCE
2. Insert the feet. The longest part
must be positioned behind on
the rear the convector.
SIDE VIEW
D
B
F
C
D. Side Control panel
E. Rear holes for wall mounting
F. Rear brackets for wall mounting
REAR VIEW
E
3. Tighten the wing nuts on the feet.
17