Argo HIFAN HiFi Manuel d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Argo HIFAN HiFi. Argo HIFAN HiFi 6 pages. Ceramic fan heater

 The appliance heats up slightly when in use. In order to avoid burns, do not let bare skin touch hot

surfaces.

 Do not run the cord under carpets. Do not cover the cord with blankets, carpets or similar materials.

Place the cord far away from busy areas or where it cannot be accidentally pulled-out.

 Do not operate the fan heater in close proximity to bathtubs, showers, washbasins or pools.

 Do not position the fan heater below a socket outlet.

 Do not operate the appliance outdoors.

WARNING: do not use the fan heater with a controller or any other external device that

activates the appliance automatically, as there may be a risk of fire if the fan heater is covered

or incorrectly positioned.

 Upon initial start-up, the fan heater may emit a slight, harmless smell. This smell is a normal effect of

the initial heating up of the internal heating elements, and should not recur later on.

 Non posizionare il termoventilatore sotto una presa.

WARNING:

DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF DISCONNECTING

POWER. WHEN SERVICING OR MOVING THE HEATER, ALWAYS UNPLUG THE POWER CORD.

Open the box and remove the 3 parts of the appliance: body, base and remote control unit.

Combine the two halves of the base, as shown in the diagram.

Undo the element fastening the appliance.

3. Insert the base onto the lower part of the appliance and tighten the fastening element.

4. Stand the appliance up vertically on a level surface before switching on.

V 07/11

ASSEMBLY INSTRUCTIONS

Unit

Fastening element

Unit

主机

锁

扣

Fastening element

Base

底座

束