Argo IP24 Manuel d'utilisation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Argo IP24. Argo IP24 10 pages. Electric convector heater with glass panel
Imprimer la page
covered or incorrectly positioned.
The appliance is equipped with an IP24 degree of protection
and can be used in private bathrooms in zone 2.
The convector must not be touched by people that use bath tubs
and showers.
Disconnect the mains power when the appliance is not used or for
cleaning operations.
To disconnect the convector, set the selector to 0 and remove the
plug from the socket. Pull on the plug only. Do not pull the cord.
Avoid placing fingers or foreign objects in the air inlet/outlet
grilles, as this may lead to electric shock or fire and may damage the
convector. To avoid the risk of fire, do not block the grilles or tamper
with them in any way while the convector operates.
Do not use the convector if the cord or plug is damaged. If the
power supply cord is damaged, it must be replaced by the
manufacturer, dealer or a similarly qualified person so as to avoid any
safety risks.
Do not place any objects on the cord and do not bend it. During
operation, the cord must be entirely unwound.
It is not advisable to use extension cords, as these may overheat
and cause the risk of fire. Do not use a single extension cord to
operate more than one convector.
The convector heats up significantly during operation. Risk of
burn. To avoid injury, do not allow skin to come into contact with a hot
surface. Use the handle to move the convector. Keep flammable
materials, such as furniture, cushions, blankets, paper, cloths,
curtains and suchlike at least 1 m from the front and back
Do not immerse the cord, plug or any other element of the panel
V 09/16
14