Argo DRY DIGIT EVO 13 Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Argo DRY DIGIT EVO 13. Argo DRY DIGIT EVO 13 9 pages.

Warning

Do not wet the appliance or immerse it in water, otherwise electric shocks may occur.

Use a damp and soft cloth to clean the exterior surface of the dehumidifier.

Do not use solvents, petrol, xylene, talcum powder or brushes to clean the unit: these may damage

the surface or colour of the casing.

We advise removing the tank once every few weeks to prevent mould and bacteria forming on it. Fill the tank with clean

water a small amount of detergent; swill the water around in it, then it out and rinse it thoroughly.

V 03/19

CLEANING THE WATER TANK

The filter is designed to remove dust or dirt from the air.

If the filter is clogged by dust, electricity consumption will be higher than normal.

For most effective dehumidification, clean the filter every 250 hours of

operation. After 250 hours of operation, the FILTER RESET (Dry Digit 13 and 17)

led turns on to indicate that it is time to clean the filter.

Cleaning instructions:

1. Compress the two tabs and pull the filter out.

2. Clean the filter with a vacuum cleaner or wash it with clean water at no more

than 40°C.

DO NOT USE ALCOHOL, BENZENE OR OTHER AGGRESSIVE PRODUCTS TO

CLEAN THE FILTER.

3. Leave the filter to dry naturally, then reposition it in the relevant slot.

4. Press the FILTER button (Dry Digit 13 and 17 only).