Cisco AIM-VPN - DES/3DES VPN Data Encryption AIM Module Manuel de l'utilisateur - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cisco AIM-VPN - DES/3DES VPN Data Encryption AIM Module. Cisco AIM-VPN - DES/3DES VPN Data Encryption AIM Module 23 pages. Vpn encryption module (aim-vpn/epii, aim-vpn/hpii, aim-vpn/bpii family)
Imprimer la page
show crypto engine accelerator statistic
Table 4
show crypto engine accelerator statistic Compression Statistics Descriptions for a Cisco 2600, Cisco 3600 or
Cisco 3700 VPN module
Count Label
cgx_cmd_pending
packet_loop_max
packet_loop_limit
Tip
In Cisco IOS Release 12.2(8)T and later releases, you can add a time stamp to show commands that use
the EXEC prompt timestamp command in line configuration mode.
Related Commands
Command
clear crypto engine accelerator
counter
crypto ca
crypto cisco
crypto dynamic-map
crypto engine accelerator
crypto ipsec
crypto isakmp
crypto key
crypto map
debug crypto engine accelerator
control
debug crypto engine accelerator
packet
show crypto engine accelerator
sa-database
show crypto engine accelerator
ring
show crypto engine brief
show crypto engine configuration
show crypto engine connections
Cisco IOS Release 12.3(7)T
18
DES/3DES/AES VPN Encryption Module (AIM-VPN/EPII, AIM-VPN/HPII, AIM-VPN/BPII Family)
Significance
Not used in Cisco 2600/3600 VPN.
Not used in Cisco 2600/3600 VPN.
Not used in Cisco 2600/3600 VPN.
Description
Resets the statistical and error counters for the hardware
accelerator to zero.
Defines the parameters for the certification authority used for a
session.
Defines the encryption algorithms and other parameters for a
session.
Creates a dynamic map crypto configuration for a session.
Enables the use of the onboard hardware accelerator for IPSec
encryption.
Defines the IPSec security associations and transformation sets.
Enables and defines the IKE protocol and its parameters.
Generates and exchanges keys for a cryptographic session.
Creates and modifies a crypto map for a session.
Displays each control command as it is given to the crypto
engine.
Displays information about each packet sent for encryption and
decryption.
Displays the active entries in the crypto engine SA database.
Displays the contents of command and transmits rings for the
crypto engine.
Displays a summary of the configuration information for the
crypto engine.
Displays the version and configuration information for the
crypto engine.
Displays a list of the current connections maintained by the
crypto engine.
Associated Error
Number
—
—
—