Cisco Aironet 1040 Series Fiche technique - Page 4
Parcourez en ligne ou téléchargez le pdf Fiche technique pour {nom_de_la_catégorie} Cisco Aironet 1040 Series. Cisco Aironet 1040 Series 6 pages. Brochure
Également pour Cisco Aironet 1040 Series : Manuel de démarrage (35 pages)
Imprimer la page
Item
Maximum Transmit
Power
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific
details.
Available Transmit
Power Settings
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific
details.
Integrated Antenna
Interfaces
Indicators
Dimensions
(W x L x H)
Weight
Environmental
System Memory
Input Power
Requirements
Powering Options
Power Draw
Warranty
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Specification
-78 dBm @ MCS11
-74 dBm @ MCS11
-75 dBm @ MCS12
-71 dBm @ MCS12
-71 dBm @ MCS13
-67 dBm @ MCS13
-69 dBm @ MCS14
-65 dBm @ MCS14
-68 dBm @ MCS15
-64 dBm @ MCS15
2.4GHz
● 802.11b
20 dBm with one antenna
◦
● 802.11g
20 dBm with two antenna
◦
● 802.11n (HT20)
20 dBm with two antennas
◦
◦
2.4GHz
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
-1 dBm (0.78 mW)
● 2.4 GHz, gain 4.0 dBi, horizontal beamwidth 360°
● 5 GHz, gain 3.0 dBi, horizontal beamwidth 360°
● 10/100/1000BASE-T autosensing (RJ-45)
● Management console port (RJ-45)
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
● Access point (without mounting bracket): 8.7 x 8.7 x 1.84 in. (22.1 x 22.1 x 4.7 cm)
● 2.3 lbs (1.04 kg)
● Nonoperating (storage) temperature: -22 to 185° F (-3 0 to 85° C)
● Operating temperature: 32 to104° F (0 to 40° C)
● Operating humidity: 10 to 90% percent (noncondensing)
● 128 MB DRAM
● 32 MB flash
● AP1040: 44 to 57 VDC
● Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
● 802.3af Ethernet Switch
● Cisco AP1040 Power Injectors (AIR-PWRINJ4=)
● Cisco AP1040 Local Power Supply (AIR-PWR-B=)
● AP1040: 12.95 W
Note: When deployed using PoE, the power drawn from the power sourcing equipment will be higher by some amount
dependent on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total
system power draw (access point + cabling) to 15.4W.
Limited Lifetime Hardware Warranty
-81 dBm @ MCS11
-74 dBm @ MCS11
-78 dBm @ MCS12
-74 dBm @ MCS12
-73 dBm @ MCS13
-69 dBm @ MCS13
-72 dBm @ MCS14
-67 dBm @ MCS14
-70 dBm @ MCS15
-66 dBm @ MCS15
5GHz
● 802.11a
20 dBm with two antennas
◦
● 802.11n non-HT duplicate mode
20 dBm with two antennas
◦
● 802.11n (HT20)
20 dBm with two antennas
◦
● 802.11n (HT40)
20 dBm with two antennas
◦
5GHz
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
-1 dBm (0.78 mW)
Data Sheet
Page 4 of 6