Digitek 18ASF-7000 Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Digitek 18ASF-7000. Digitek 18ASF-7000 18 pages. Digital signal meter
Imprimer la page
Safety use:
1.
Consumers using the product for the first time should read this manual carefully.
2.
Do not touch the LCD screen.
3.
Do not place heavy items on the device.
4.
Do not lay the device close to heating source, in the sunshine, in place with strong mechanical vibration or dusty
environments.
5.
Please place the device in ventilated surroundings.
6.
The device should be fully charged before using for the first time (recommend 6 hours for the first charging).
7.
Contact the provider if malfunction of the device happens.
8.
Damaging the device during operation without following the guidelines will not be warranted.
9.
Do not use the other cables like headphone; only use the AV cables supplied.
Danger warning:
1.
Prohibition of decomposition of batteries.
2.
Prohibition of battery short circuit.
3.
Do not reverse the positive and negative pole terminals.
4.
No heating and burning batteries.
5.
Avoid using batteries near heat sources.
6.
Do not get wet.
7.
Avoid charging in the vicinity of fire or direct sunlight.
8.
Use the dedicated charger and charge lead.
9.
Prohibit the destruction of batteries.
10. No direct soldering on battery.
11. Do not connect the battery charging in the power outlet or car cigarette lighter.
12. Do not use batteries for other devices.
13. Do not direct contact with the battery.
14. When the battery and the electric equipment are connected or charge, pay attention to the polarity of the battery.
Press [▲/▼] on PVR Configure and press "OK'', then you can see the following menu. In this submenu, you can
get the information about the USB device you insert and set the correct format for PVR.