Cisco Aironet 1140 Series Manuel de démarrage - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco Aironet 1140 Series. Cisco Aironet 1140 Series 37 pages. Autonomous access point
Également pour Cisco Aironet 1140 Series : Manuel de démarrage (35 pages), Manuel de configuration (40 pages), Fiche technique (6 pages), Manuel de démarrage (31 pages)
Imprimer la page
Configure the settings using the following sections as a guide.
Step 5
• Host Name—The host name (or system name) is a name for the access point that identifies
it on your network. The system name appears in the titles of the management system
pages.
• Configuration Server Protocol—This setting specifies how the access point obtains an IP
address.
DHCP—IP address is automatically assigned by the network DHCP server.
–
Static IP—The access point uses a static IP address that you enter in the IP address
–
field.
• IP Address—This setting assigns or changes the access point IP address. If DHCP is
enabled, the access point obtains its IP address from your network DHCP server. You can
assign a static IP address in this field.
• IP Subnet Mask—The IP subnet mask identifies the subnet on which the access point
resides. This subnet is provided by your network administrator. If DHCP is enabled, leave
this field blank.
11