Cisco Aironet 1400 Series Fiche technique - Page 15
Parcourez en ligne ou téléchargez le pdf Fiche technique pour {nom_de_la_catégorie} Cisco Aironet 1400 Series. Cisco Aironet 1400 Series 16 pages. Wireless bridge
Également pour Cisco Aironet 1400 Series : Manuel (35 pages)
Imprimer la page
OSPF Sham-Link Support for MPLS VPN
show ip ospf sham-links
To display information about all sham-links configured for a provider edge (PE) router in the Virtual
Private Network (VPN) backbone, use the show ip ospf sham-links command in EXEC mode.
Syntax Description
This command has no arguments or keywords.
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Release
12.2(8)T
Usage Guidelines
Use this command to display Open Shortest Path First (OSPF) information about the sham-links
configured on a PE router.
Examples
The following example shows sample output from the show ip ospf sham-links command for a PE
router in the VPN backbone:
Router1# show ip ospf sham-links
Sham Link OSPF_SL0 to address 10.44.0.1 is up
Area 120 source address 10.0.0.1
Run as demand circuit
DoNotAge LSA allowed., Cost of using 1
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
show ip ospf sham-links
Modification
This command was introduced.
Hello due in 00:00:09
Adjacency State FULL (Hello suppressed)
Index 2/2, retransmission queue length 0, number of retransmission 27
First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)
Last retransmission scan length is 0, maximum is 2
Last retransmission scan time is 0 msec, maximum is 0 msec
show ip ospf sham-links
Cisco IOS Release 12.2(8)T
15