Sony NEX-5D Manuel d'entretien - Page 30
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Sony NEX-5D. Sony NEX-5D 34 pages. Interchangeable lens digital camera
Également pour Sony NEX-5D : Manuel d'entretien (49 pages)
Imprimer la page
Ver.1.2 2010.07
The changed portions from
Ver.1.1 are shown in blue.
Assembly-9: LC Flexible Insulating Sheet
putting position
LC Flexible Insulating Sheet
Without running on the
black printing area on
FP-1237 Flexible Complete
Board
Without running off the
edge of FP-1237 Flexible
Complete Board
FP-1237 Flexible Complete Board
Assembly-10: Insulating Sheet B (SY) putting position
Insulating Sheet B (SY)
SY-258 Complete Board
Without running on the chip.
Assembly-11: Routing of Microphone Harness
Pass the harnesses through the
corner of SY-258 Complete Board.
Insert the surplus part
into the Front Cabinet.
Microphone
Harness
SY-258 Complete Board
NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2
A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED
Assembly-12: Inserting Gasket (MS)
(NEX-5A/5D/5K/5CK/5H)
Insert Gasket (MS) between BT Frame Assy and
CN-439 Complete Board without evagination.
BT Frame Assy
Gasket (MS)
CN-439
Complete Board
Assembly-13: Assemble BT Holder Block Assy
(NEX-5A/5D/5K/5CK/5H)
Shutter Unit
BT Holder Block Assy
Shutter Flexible Board
Assembly-14: Routing of Microphone Harness
(NEX-5A/5D/5K/5CK/5H)
RL Block Assy
Microphone Harness
SP Holder
Route the part shown with
broken line inside SP Holder.
Assembly-15: Lithium Rechargeable Battery
putting position
NEX-5A/5D/5K/5CK/5H
Printing shows position
of Lithium Rechargeable
Soldering
Battery
RL-101 Complete Broad
Lithium Rechargeable Battery
NEX-3A/3D/3K
Printing shows position of
Lithium Rechargeable Battery
Soldering
RL-103 Complete Board
Lithium Rechargeable Battery
Assembly-16: Note when assembling
RL Block Assy
(NEX-5A/5D/5K/5CK/5H)
PW Knob
Note: Make sure that the PW Knob is
turned to OFF position when
assembling RL Block Assy.
RL Block Assy
3-2
Assembly-17: Note on Alignment of the Flexible Board
when assembling SY Holder Block Assy
(NEX-3A/3D/3K)
Outside SY Holder
Under SY Holder
SY Holder
Block Assy
Block Assy
Block Assy
Between Shutter Unit
and SY Holder Block Assy
Under SY Holder
Block Assy
Above SY Holder
Block Assy
Assembly-18: Radiation Sheet (SY) (210)
putting position
(NEX-3A/3D/3K)
Attach Radiation Sheet (SY) (210) on SY-258 Complete
Board without running off more than two corners of the IC.
SY-258 Complete Board
Radiation Sheet (SY) (210)
Assembly-19: Note on Alignment of the Flexible Board
when assembling
Jack Cover Base
(NEX-5A/5D/5K/5CK/5H)
Under Jack Cover Base
Jack Cover Base
Above Jack Cover Base