Sony SSC-C104 Manuel d'entretien - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Sony SSC-C104. Sony SSC-C104 45 pages. Ccd color video camera
Également pour Sony SSC-C104 : Mode d'emploi (4 pages)
Imprimer la page
SSC-C104/C108P
Commercial measuring equipment and fixture
* Oscilloscope
* Vectorscope
¢ Waveform Monitor (WFM)
¢ Digital Voltmeter
* Color Monitor
¢ Lens (1/2 inch C/CS mount and manual iris type)
Adjust C/CS adjusting ring on the body.
Lens mount surface
a: should be under 9 mm (C mount) or 4mm (CS mount)
*NDFilter
ND 4 (25%) 50 mm Square made by Kenko
4-1-2.
Connection for Adjustment
Pattern box
PTB-500
Power suppy
VIDEO OUT
(SSC-C104)
AC 24V 60Hz
(SSC-C108P)
AC 230V 50Hz
Waveform monitor
(WFM)
Vectorscope
4-2
4-2.
VCO ADJUSTMENT
Object
: Close "C"
Equipment
: Digital Voltmeter
Measurement
: MB-653 Board TP1 (CN202-1Ipin)
Adjustment point :MB-653 Board CT301
Specification
:2.9+0.1V
4-3.
SIGNAL PROCESS ADJUSTMENT
[Adjustment Location]
CT301
RV402
RV302
@
Pe
@
RV407_—-
RV8O1
@
@
V301
=
1)
.
RV401
iC403
@
RV408
1
RV406 RV403
@.
CN202
0
RV202
TP5~ic401
7)
RV405 Rv404TP4O,
RV201
O
7p
@
TP7O OTP6
MB-653 BOARD
-A SIDE-
[Switch Setting]
¢ Rear Panel
AGC vovvesceesee
TURBO ....... NORM
BGC. .osctesasests OFF
CCD IRIS .... |OFF
[PGLL, V SUB Setting Value]
According to the set values of the CCD image element, this
adjustment should be made.
The values to be set are displayed in two-digit codes at the
back of each CCD image element.
This code is also posted on the front panel.
If the CCD image element has not been replaced, refer to
the code posted on the front panel and adjust.
If it has been replaced correct this code posted to the code
displayed at the back of the new CCD image element.
TT
PGLL code
V SUB code