Sony XCL-CG510C Manuel technique - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Sony XCL-CG510C. Sony XCL-CG510C 48 pages. Digital video camera module

Imprimer la page

Camera link output settings

Camera link tap can be selected from 1, 2 or 3.
Camera link clock frequency can be selected from 45 MHz or 75 MHz.
By turning down the clock frequency, the length of the camera link cable can be extended because of durability
improvement against the attenuation of image signals.
Camera link tap and Camera link clock settings will be saved on the flash memory automatically and enabled after
restart.
You don't have to set each time when launching the application.
Command
CAMERALINK-TAP
BASE-CLOCK
Combinations of camera link taps and output bit lengths.
Output Bit Length
Defect detection function
Defect offset function
Shading detection function
Shading offset function
z Usable function – Not usable function
* XCL-CG510C only
Parameter
1/2/3
Sets the Camera link tap.
45/75
Specifies the Camera link clock frequency [MHz].
Setting other than provided in left will not work.
CAMERALINK-TAP
1
8
z
z
10
z
12
z
24*
z
z
z
z
2
3
z
z
z
–
z
–
–
–
–
–
z
z
–
–
z
z
12