Sony XCL-CG510C Manuel technique - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Sony XCL-CG510C. Sony XCL-CG510C 48 pages. Digital video camera module

Imprimer la page

1. Features

System Components

Video Camera Module

Camera module interface

board

Camera Link cable

(Sony Camera-compatible)

Camera cable

CCXC-12P02N (2 m, 6.6 ft)

CCXC-12P05N (5 m, 16.4 ft)

CCXC-12P10N (10 m, 32.8 ft)

CCXC-12P25N (25 m, 82 ft)

Install the board in a PCI/PCI-Express slot in devices such as a computer. Select a

commercially available interface board compatible with the Camera Link feature. You can use

either a board that supports PoCL, or one that does not.

Due to the performance of the board, the frame rate may become low according to lack of

processing capacity. To have this product output frames at the highest speed, use a board

corresponding to PCI-Express.

Performance may also be dependent on the host device (e.g., Computer), so consult the

dealer if images are not displayed properly.

This cable connects to the DIGITAL Interface connector on the rear panel of the camera

module. Image/control signals are transmitted via this cable.

If there is support for PoCL, power is also supplied at the same time.

If you use a camera module interface board with support for PoCL, be sure to use a camera

link cable with support for PoCL.

Spotted noise may appear in a specific brightness in the window according to the attribute of

the cable. If this noise is an obstacle, use a shorter cable.

C-mount lens

Camera adaptor

Use a lens appropriate

DC-700/700CE

for the pixel count of

the camera.

Tripod adaptor

VCT-333I (Insulated type)