Sony Cd Player Mode d'emploi - Page 2
Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} Sony Cd Player. Sony Cd Player 2 pages. Read this first guide
Également pour Sony Cd Player : Lisez d'abord ceci (2 pages)
Imprimer la page
To cancel Program Play
Playing the iPod
Press PLAY MODE
repeatedly until "PGM"
disappears while the player is stopped.
1
Select the iPod function.
To delete the last track or file of the program
Press FUNCTION +/
repeatedly.
Press CLEAR
while the player is stopped.
2
Place the iPod.
To view program information, such as total
track number of the program
Press DISPLAY
repeatedly.
Using optional audio components
1
Prepare the sound source.
Connect additional audio component to the AUDIO
3
Start playback.
IN jack
on the unit using an audio analog cord
Press (or on the unit)
(not supplied).
.
2
Turn down the volume.
To control the iPod
Press VOLUME
.
You can control your iPod with the following buttons on
the remote or unit.
3
Select the AUDIO IN function.
Press FUNCTION +/
repeatedly.
To
Press
4
Start playback.
(pause) (or (play/pause)
Pause playback
on the unit)
or (stop)
.
Start playback of the connected component and adjust
Scroll up/down the
its volume.
/
. You can scroll up or
iPod menus
down the iPod menus much like
5
Adjust the volume.
the Click Wheel operations of
Press VOLUME +/
.
the iPod or the drag up-or-down
operations of the iPod touch.
Select a track
/ (go back/go forward)
Adjusting the sound
or chapter of
. To fast-forward or fast-
audiobook/podcast
rewind, hold down the button.
To
Press
Choose the selected
/
(enter) (or ENTER on
Generate a more dynamic
DSGX
item
the unit)
. You can choose the
sound (Dynamic Sound
selected item much like the center
Generator X-tra)
button on the iPod or the touch
operation of the iPod touch.
Set the sound effect
EQ
Find a point in a
Hold down / (rewind/
track or chapter of
fast forward)
during playback,
audiobook/podcast
and release the button at the
Changing the display
desired point.
Return to the
/TOOL MENU
/
To
Press
previous menu or
(return)
. You can return to the
select a menu
previous menu or select a menu
Change
DISPLAY
much like the Menu button on
information on the
system is on.
the iPod or the touch operation
display
1)
of the iPod touch.
Check the clock
DISPLAY
when the system
off
2)
. The clock is displayed for 8
To use the system as a battery charger
is off.
seconds.
You can use the system as a battery charger for the iPod
For example, you can view CD/MP3 disc information, such as;
1)
when the system is on.
track or file number during normal play.
The charging begins when the iPod is placed on the
track or file name ("
") during normal play.
unit's connector. The charging status appears in the iPod
artist name (" ") during normal play.
display. For details, see the user's guide of your iPod.
album or folder name ("
") during normal play.
total playing time while the player is stopped.
To stop charging the iPod
volume label if it exists on the disc.
Remove the iPod.
You can also view DAB station information (CMT-LX40i only) such
as the service name, channel label, preset number, frequency, DLS
(Dynamic Label Segment), or ensemble label.
Notes
When placing or removing the iPod, handle the iPod in the same
2)
The STANDBY indicator on the unit lights up when the system is
angle as that of the iPod connector on the unit and do not twist or
off.
sway the iPod to prevent connector damage.
Do not carry the unit with an iPod set on the connector. Doing so
Notes on the display information
may cause a malfunction.
Characters that cannot be displayed appear as "_".
When placing or removing the iPod, brace the unit with one hand
The following are not displayed;
and take care not to press the controls of the iPod by mistake.
total playing time for an MP3 disc.
Before disconnecting the iPod, pause playback.
remaining playing time for an MP3 file.
While playing video, you cannot use /
. You can fast
The following are not displayed correctly;
rewind (fast forward) by holding down /
.
elapsed playing time of an MP3 file encoded using VBR (variable
To change the volume level, use VOLUME +/
. The volume level
bit rate).
does not change even if adjusted on the iPod.
folder and file names that do not follow either the ISO9660
This system is designed for iPod only. You cannot connect any other
Level 1, Level 2 or Joliet in the expansion format.
portable audio players.
The following are displayed;
To use an iPod, refer to the user's guide of your iPod.
total playing time for a CD-DA disc during normal play.
Sony cannot accept responsibility in the event that data recorded to
remaining playing time for a track.
iPod is lost or damaged when using an iPod with this system.
remaining playing time of a current CD-DA disc during normal
play.
ID3 tag information for MP3 files when ID3 version 1 and
version 2 tags are used (ID3 version 2 tag information display has
Creating your own program
priority when both ID3 version 1 and version 2 tags are used for a
single MP3 file).
(Program Play)
up to 15 characters of ID3 tag information using uppercase letters
(A to Z), numbers (0 to 9), and symbols (" $ % ' ( ) * + , – . / < = >
Use buttons on the remote to create your own program.
@ [ \ ] _ ` { | } ! ? ^).
1
Select the CD function.
Note on the DAB display information (CMT-LX40i only)
Press FUNCTION +/
repeatedly.
The following is also displayed;
up to 8 characters of service name, up to 128 characters of DLS
2
Select the play mode.
(Dynamic Label Segment) and up to 16 characters of ensemble
label using uppercase letters (A to Z), numbers (0 to 9), and
Press PLAY MODE
repeatedly until "PGM"
symbols (" $ % ' ( ) * + , – . / < = > @ [ \ ] _ ` { | } ! ? ^).
appears while the player is stopped.
3
Select the desired track or file number.
Press /
repeatedly until the desired track
or file number appears.
When programming MP3 files, press
+/
repeatedly to select the desired folder, and then select
the desired file.
Selected track or file number
Total playing time of the
selected track or file
4
Program the selected track or file.
Press
to enter the selected track or file.
5
Repeat steps 3 through 4 to program additional
tracks or files, up to a total of 25 tracks or files.
6
To play your program of tracks or files, press
.
The program remains available until you remove the
disc. To play the same program again, select the CD
function, and then press
.
Troubleshooting
Using the timers
The system offers two timer functions. If you use both
1
timers, the Sleep Timer has priority.
Make sure the power cord and speaker cords are
correctly and firmly connected.
Sleep Timer:
2
Find your problem in the checklist below, and take
You can fall asleep to music. This function works even if
the indicated corrective action.
the clock is not set.
If the issue persists, contact your nearest Sony dealer.
Press SLEEP
repeatedly. If you select "AUTO, " the
system automatically turns off after the current disc stops
If the STANDBY indicator flashes
or in 100 minutes.
Immediately unplug the power cord, and check the
Play Timer:
following items.
You can wake up to CD, tuner or iPod at a preset time.
If your system has a voltage selector, is the voltage
Make sure you have set the clock.
selector set to the correct voltage?
Use buttons on the remote to use the Play Timer
Are you using only the supplied speakers?
functions.
Is anything blocking the ventilation holes on the top
1
Prepare the sound source.
or back of the system?
Is the iPod connector short-circuited?
Prepare the sound source, and then press VOLUME
+/
to adjust the volume.
After the STANDBY indicator
To start from a specific CD track or audio file, create
reconnect the power cord, and turn on the system. If
the issue persists, contact your nearest Sony dealer.
your own program.
2
Select the timer set mode.
Press TIMER MENU
.
General
3
Set the play timer.
The system does not turn on.
Press /
repeatedly to select "PLAY SET, " then
Is the power cord plugged in?
press
.
"ON TIME" appears, and the hour indication flashes.
There is no sound.
4
Are the + and speaker cords short-circuited?
Set the time to start playback.
Are you using only the supplied speakers?
Press /
repeatedly to set the hour, then press
Is anything blocking the ventilation holes on the top or
.
back of the system?
The minute indication flashes. Use the procedure
The specified station may have temporarily stopped
above to set the minutes. "OFF TIME" appears and the
on the unit.
broadcast.
hour indication flashes in the display.
5
Use the same procedure as in step 4 to set the time
The STANDBY indicator
to stop playback.
unplugging the power cord.
.
The STANDBY indicator
6
Select the sound source.
immediately after unplugging the power cord. This
Press /
repeatedly until the desired sound
is not a malfunction. The indicator will turn off after
source appears, then press
. The display shows
about 40 seconds.
the timer settings.
7
Sound comes from one channel, or the left and
Turn off the system.
right volumes are unbalanced.
Press
. The system turns on 15 seconds before
Place the speakers as symmetrically as possible.
repeatedly when the
the preset time.
Connect only the supplied speakers.
If the system is on at the preset time, the Play Timer
will not play. Do not operate the system from the time
Severe hum or noise.
when the system is
the system turns on until the playback starts.
Move the system away from sources of noise.
To check the setting
Connect the system to a different wall outlet.
Install a noise filter (available separately) to the power
1
Press TIMER MENU
.
cord.
"SELECT" flashes in the display.
The remote does not function.
2
Press
.
Remove any obstacles between the remote and the
3
Press /
repeatedly to select "PLAY SEL," then
remote sensor
press
.
away from fluorescent lights.
Point the remote at the system's sensor.
To cancel the timer
Move the remote closer to the system.
Repeat the same procedure as above until "OFF" appears
in step 3, and then press
.
CD/MP3 player
To change the setting
The sound skips, or the disc will not play.
Start over from step 1.
Wipe the disc clean, and replace it.
Notes for the iPod user
Move the system to a location away from vibration (for
Make sure the iPod is not playing when using the Play Timer.
example, on top of a stable stand).
The Play Timer may not be activated depending on the status of the
connected iPod.
Move the speakers away from the system, or place them
on separate stands. At high volume, speaker vibration
Tip
may cause the sound to skip.
The Play Timer setting remains as long as the setting is not cancelled
manually.
Play does not start from the first track.
Return to Normal Play by pressing PLAY MODE
repeatedly until both "PGM" and "SHUF" disappear.
Starting playback takes more time than usual.
The following discs can increase the time it takes to start
playback:
a disc recorded with a complicated tree structure.
a disc recorded in multisession mode.
a disc that has not been finalized (a disc to which data
a disc that has many folders.
The system does not eject the disc and
"LOCKED" appears.
Contact your Sony dealer or local authorized Sony
service facility.
Tuner
Severe hum or noise, or stations cannot be
received. ("TUNED" or "STEREO" flashes on the
display.)
Connect the antenna properly.
Find a location and an orientation that provide good
reception, and then set up the antenna again.
Keep the antennas away from the speaker cords and the
power cord to avoid picking up noise.
Turn off nearby electrical equipment.
"TUNED" does not appear in the display (DAB
only).
Check all antenna connections, then perform the DAB
Automatic Scan procedure (see "Reception of DAB
radio station (CMT-LX40i only)").
The current DAB service may not be available. Press
+/ (or TUNE +/ on the unit)
service.
If you have moved to another area, some services/
frequencies may have changed and you may not be able
to tune into your usual broadcast.
Perform the DAB Automatic Scan procedure to
re-register the contents of broadcasts. (Performing this
procedure clears all previously stored presets.)
iPod
There is no sound.
Make sure the iPod is connected securely.
Make sure the iPod is playing music.
Adjust the volume.
The sound is distorted.
Turn down the volume.
Set the "EQ" setting of the iPod to "Off " or "Flat. "
The remote does not function.
Make sure the iPod is updated with the latest software.
If not, update the iPod before using with the system.
The iPod cannot be charged.
Make sure the iPod is connected securely.
You can use the system as a battery charger for iPod
only when the system is on.
"OVER CURRENT" appears.
stops flashing,
A problem has been detected with the level of electrical
current from the iPod connector. Turn off the system
and remove the iPod from the iPod connector. Make
sure there is no problem with the iPod. If this display
pattern persistes, contact your nearest Sony dealer.
To change the AM tuning interval
(CMT-LX20i only)
The AM tuning interval is factory-preset to 9 kHz (or
10 kHz for some areas).
Use buttons on the unit to change the AM tuning
interval.
1
Tune in any AM station, and then turn off the
system.
2
Press DISPLAY
to display the clock.
3
remains lit after
While holding down
, press
All the AM preset stations are erased. To reset the
interval to the factory preset, repeat the procedure.
may not turn off
To improve disc loading performance
Turn on the CD player power using the CD power
management function. By default, the CD player power
is turned off.
Use buttons on the unit to turn on the CD player power.
1
Press FUNCTION +/
repeatedly to select the CD
function.
2
Press
to turn off the system.
3
After "STANDBY" stops flashing, press DISPLAY
to display the clock and then press
holding down
.
"CD POWER ON" appears. Turning the CD player
power on, decreases disc access time and improves
loading performance.
on the unit, and position the unit
If there is poor tuner reception when the CD player
power is turned on, return the setting to default. To
turn off the CD player power, repeat the procedure
until "CD POWER OFF" appears.
To reset the system to factory settings
If the system still does not operate properly, reset the
system to factory settings.
Use buttons on the unit to reset the unit to its factory
default settings.
1
Disconnect and reconnect the power cord, and then
turn on the system.
2
Hold down
and ENTER
, and press
All user-configured settings, such as preset radio
stations, timer, and the clock, are deleted.
Messages
COMPLETE: The preset operation ended normally.
FULL: You tried to program more than 25 tracks or files
(steps).
LOCKED: The system does not eject the disc. Contact
can be added).
your nearest Sony dealer.
NO DISC: There is no disc in the player, or you have
loaded a disc that cannot be played.
NoPRESET (DAB only): There is no stored preset station.
NO SERV (DAB only): There is no supported DAB
broadcast in your country or region.
NO STEP: All of the programmed tracks have been
erased.
No TEXT (DAB only): There is no text information in the
received service.
NOT USED: You pressed an invalid button.
OVER: You have reached the end of the disc while
pressing
during playback or pause.
PUSH STOP: You pressed PLAY MODE
playback.
READING: The system is reading information from the
disc. Some buttons are not available.
TIME NG: The Play Timer start and end times are set to
the same time.
to select a different
Display examples
On the speaker system
This speaker system is not magnetically shielded, and
Display
indicates
the picture on nearby TV sets may become magnetically
2 (two)
distorted. In this situation, turn off the TV, wait 15 to 30
minutes, and turn it back on.
5 (five)
If there is no improvement, move the speakers far away
6 (six)
from the TV.
8 (eight)
Cleaning the cabinet
Clean this system with a soft cloth slightly moistened
0 (zero)
with a mild detergent solution. Do not use any type
A
of abrasive pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
B
D
Specifications
G
H
Main unit
K
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
M
(CMT-LX20i The United States model only)
With 4 ohm loads, both channels driven, from 120 10,000 Hz; rated 25 watts
O
per channel minimum RMS power, with no more than 10% total harmonic
distortion from 250 milliwatts to rated output.
Q
Amplifier section
R
CMT-LX40i
DIN power output (rated):
S
4 + 4 watts (4 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 5 + 5 watts (4 ohms at 1 kHz,
Z
10% THD)
Music power output (reference): 9 + 9 watts
! or |
CMT-LX20i
DIN power output (rated):
"
4 + 4 watts (4 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 5 + 5 watts (4 ohms at 1 kHz,
$
10% THD)
Inputs
%
AUDIO IN (stereo mini jack): Voltage 775 mV, impedance 22 kilohms
Outputs
,
PHONES (stereo mini jack): accepts headphones with an impedance of
8 ohms or more
.
.
SPEAKER: accepts impedance of 4 ohms
?
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
@
Emission Duration: Continuous
Laser Output*: Less than 44.6µW
^
* This output is the value measurement at a distance of 200mm from the
objective lens surface on the Optical Pick-up Block with 7mm aperture.
Frequency response: 20 Hz 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Precautions
Tuner section
DAB tuner section (CMT-LX40i only):
Frequency range*
Band-III: 174.928 (5A) 239.200 (13F) MHz
* For details, see "DAB frequency table" below.
Discs that this system CAN play
Antenna: DAB lead antenna
Antenna terminal: 75 ohms, F female
Audio CD
while
CD-R/CD-RW (audio data/MP3 files)
DAB frequency table (Band-III)
Frequency
Discs that this system CANNOT play
174.928 MHz
CD-ROM
176.640 MHz
CD-R/CD-RW other than those recorded in music CD
178.352 MHz
format or MP3 format conforming to ISO9660 Level
180.064 MHz
1/Level 2, Joliet
181.936 MHz
CD-R/CD-RW recorded in multisession that have not
183.648 MHz
ended by "closing the session"
185.360 MHz
CD-R/CD-RW of poor recording quality, CD-R/
187.072 MHz
CD-RW that have scratches or are dirty, or CD-R/CD-
188.928 MHz
RW recorded with an incompatible recording device
190.640 MHz
CD-R/CD-RW which is finalized incorrectly
192.352 MHz
Discs containing files other than MPEG 1 Audio Layer-
194.064 MHz
3 (MP3) files
195.936 MHz
Discs of non-standard shape (for example, heart,
197.648 MHz
square, star)
199.360 MHz
Discs that have adhesive tape, paper, or sticker attached
.
201.072 MHz
to them
202.928 MHz
Rental or used discs with attached seals where the glue
204.640 MHz
extends beyond the seal
206.352 MHz
Discs that have labels printed using ink that feels tacky
208.064 MHz
when touched
* Frequencies are displayed to two decimal places on this system.
Notes on discs
FM stereo, FM/AM superheterodyne tuner
Before playing, wipe the disc with a cleaning cloth from
FM tuner section:
Tuning range:
the center out to the edge.
CMT-LX40i: 87.5 108.0 MHz (50 kHz step)
Do not clean discs with solvents, such as benzine
CMT-LX20i: 87.5 108.0 MHz (100 kHz step)
thinner, or commercially available cleaners or anti-
Antenna: FM lead antenna
Intermediate frequency: 10.7 MHz
static spray intended for vinyl LPs.
AM tuner section:
Do not expose discs to direct sunlight or heat sources
Tuning range:
such as hot air ducts, nor leave it in a car parked in
CMT-LX40i:
531 1,602 kHz (9 kHz step)
direct sunlight.
CMT-LX20i:
530 1,710 kHz (10 kHz step)
On safety
531 1,710 kHz (9 kHz step)
Antenna: AM loop antenna
Completely disconnect the power cord (mains lead)
Intermediate frequency: 450 kHz
from the wall outlet (mains) if it is not going to be used
for an extended period of time. When unplugging the
unit, always grip the plug. Never pull the cord itself.
Should any solid object or liquid get into the system,
unplug the system, and have it checked by qualified
personnel before operating it again.
AC power cord must be changed only at a qualified
service shop.
during
On placement
Do not place the system in an inclined position or in
locations that are extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation, or subject to
vibration, direct sunlight or a bright light.
Be careful when placing the unit or speakers on
surfaces that have been specially treated (for example,
with wax, oil, polish) as staining or discoloration of the
surface may result.
If the system is brought directly from a cold to a warm
location or is placed in a very damp room, moisture
may condense on the lens inside the CD player, and
cause the system to malfunction. In this situation,
remove the disc, and leave the system turned on for
about an hour until the moisture evaporates.
On heat buildup
Heat buildup on the unit during operation is normal
and is not cause for alarm.
Do not touch the cabinet if it has been used
continuously at a high volume because the cabinet may
have become hot.
Do not obstruct the ventilation holes.
iPod section
Compatible iPod models:
iPod nano 4th
iPod touch 2nd
generation
iPod touch 1st
(video)
generation
generation
iPod nano 3rd
generation
iPod nano 2nd
(video)
iPod classic
generation
(aluminum)
iPod nano 1st
iPod 5th
iPod 4th
generation
generation
generation
(video)
(color display)
iPod mini
iPod 4th
generation
Speaker
Speaker system: Full-range, bass-reflex, 80 mm, cone type
Rated impedance: 4 ohms
Dimensions (w/h/d): Approx. 130 × 221 × 135 mm
Mass: Approx. 0.7 kg net per speaker
General
Power requirements:
CMT-LX40i: 230 V AC, 50/60 Hz
CMT-LX20i: 120 V AC, 60 Hz
Power consumption: 25 watts
Dimensions (w/h/d) (excl. speakers): Approx. 200 × 221 × 205 mm
Mass (excl. speakers): Approx. 2.2 kg
Supplied accessories: Remote Commander (1), R6 (Size AA) batteries (2)
(CMT-LX40i only), FM lead/AM loop antenna (1), DAB lead antenna (1)
(CMT-LX40i only)
Design and specifications are subject to change without notice.
Label
Frequency
Label
5A
209.936 MHz
10A
Halogenated flame retardants are not used in the certain printed wiring
5B
211.648 MHz
10B
boards.
5C
213.360 MHz
10C
5D
215.072 MHz
10D
6A
216.928 MHz
11A
6B
218.640 MHz
11B
6C
220.352 MHz
11C
6D
222.064 MHz
11D
7A
223.936 MHz
12A
7B
225.648 MHz
12B
7C
227.360 MHz
12C
7D
229.072 MHz
12D
8A
230.784 MHz
13A
8B
232.496 MHz
13B
8C
234.208 MHz
13C
8D
235.776 MHz
13D
9A
237.488 MHz
13E
9B
239.200 MHz
13F
9C
9D